Owner's Manual

Installation Kit

Tools Required

120 99-7579

▲

Flat Blade

Screwdriver

Parts

Supplied:

▲

Mounting

Bracket

(4) Screws

Nissan

Revision 07/13/99

DIN Assembly

(See next page for shaft assembly.)

1. Remove DIN sleeve from receiver.

2. Slide DIN sleeve into receiver

mounting bracket and secure by

bending securing tabs (See Inset).

3. Slide receiver fully into sleeve.

4. If not installing an equalizer, snap

in EQ cover plate.

Page 1 of 2

Receiver Mounting Bracket

DIN Sleeve

IMPORTANT

Before starting, compare items on your invoice with items

received. If any parts are missing, first carefully check through

packaging material. If an item is missing, please call:

Crutchfield

INSET

*120997579*

Shaft Insert

EQ Cover

Plate

EQ Cover Plate

(in place)

Securing Tabs

Bend tabs after sleeve

is inside mounting bracket.

at 1-888-955-6000

PAGE 1
Installation Kit 120 99-7579 IMPORTANT Before starting, compare items on your invoice with items received. If any parts are missing, first carefully check through packaging material. If an item is missing, please call: Nissan Crutchfield at 1-888-955-6000 DIN Assembly Revision 07/13/99 Page 1 of 2 (See next page for shaft assembly.) 1. Remove DIN sleeve from receiver. 2. Slide DIN sleeve into receiver mounting bracket and secure by bending securing tabs (See Inset). Receiver Mounting Bracket 3.
PAGE 2
120 99-7579 Installation Kit Nissan Shaft Assembly FIGURE 1 1. Snap shaft insert into opening in receiver mounting bracket (Figure 1). Page 2 of 2 2. Choose the proper spacers (supplied with your order) to allow receiver nosepiece to extend 1/8” to 1/4” beyond face of receiver mounting bracket (Figure 2). 3. Secure receiver and faceplate to mounting bracket with spacers and shaftnuts as shown. Shaft Insert Receiver Mounting Bracket 4. Attach receiver control knobs. 5.