User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 99-7867 Single DIN Installation Kit for 2001-2006 Acura MDX Vehicles

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 11/3/2014 INST99-7867

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Installation instructions for 99-7867

B C D

• A) Radio housing • B) ISO Trim plate • C) ISO Brackets • D) (4) #8 x 3/8” Phillips screws

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness:

• 70-1721

• 70-1725

Antenna Adapter:

• Not required

• Panel removal tool • Phillips screwdriver

TOOLS REQUIRED

• DIN radio provision with pocket

• ISO DIN radio provision with pocket

KIT FEATURES

Acura RSX 2002-2006

99-7867

Summary of content (4 pages)

PAGE 1
Installation instructions for 99-7867 Acura RSX 2002-2006 99-7867 WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: • 70-1721 • 70-1725 Antenna Adapter: • Not required KIT FEATURES • DIN radio provision with pocket • ISO DIN radio provision with pocket TOOLS REQUIRED • Panel removal tool • Phillips screwdriver REV.
PAGE 2
99-7867 Dash Disassembly 99-7867 Table of Contents Acura RSX 2002-2006 Dash Disassembly – Acura RSX 2002-2006...................................2 Kit Preparation.................................................3 Kit Assembly – DIN radio provision with pocket......................3 – ISO DIN radio provision with pocket................4 1. Unclip the power outlet panel and remove (2) Phillips screws exposed facing up. (Figure A, “A”) 2.
PAGE 3
Kit Preparation 99-7867 Kit Assembly 99-7867 Acura RSX 2002-2006 DIN radio provision with pocket 1. Mount the hazard switch to the back of the radio housing with (2) Phillips screws previously removed in Step 7 of the disassembly. (Figure A) 2. Mount the factory bracket assembly to the back of the radio housing with (4) Phillip screws previously removed in Step 6 of the disassembly. (Figure B) 1. Slide the DIN cage into the radio housing and secure by bending the metal locking tabs outward.
PAGE 4
Installation instructions for 99-7867 Kit Assembly 99-7867 ISO DIN radio provision with pocket 1. Mount the ISO brackets to the radio using the screws supplied with the radio. (Figure A) 2. Slide the radio into the radio housing until the ISO brackets snap into place. (Figure A) REV. 11/3/2014 INST99-7867 3. Snap the trim plate onto the front of the radio housing. (Figure A) 4. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS.