User Manual

99-7868
3
KIT ASSEMBLY
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down.
(Figure C)
3
A
Slide the aftermarket head unit into
the cage and secure. Snap the trim
plate into the housing.
(Figure D)
4
DIN HEAD UNIT PROVISIONS
B
Position speed clips provided with
the kit onto the top (2) legs on the
radio housing.
(Figure A)
1
Align holes in top of radio housing
with the guide pins on the bottom of
the storage pocket assembly and
secure the pocket assembly to the
legs holding the speed clips with the
(2) screws provided.
(Figure B)
2
C
D