User Manual

99-7872 DASH DISASSEMBLY
HONDA FIT 2007-2008
A
B
C
1
1
Unclip the (3) a/c control cables
behind glove box. ( Figure A)
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
3
Squeeze sides of glove box then pull
out and let hang to access cables
behind it.
2
Remove (2) 8 MM bolts securing
center panel then unclip, unplug
and remove entire assembly
including climate controls. ( Figure C)
NO
TE: These bolts are accessed
from underneath the climate controls.
Figure C shows assembly already
removed to show bolt location.
5
Remove (1) Phillips screw from the
panel on the bottom of the a/c
controls then unclip and remove
the panel. (
Figure B)
4
Continue to kit assembly.