Owner's Manual

Installation Kit

120 99-7890

Honda

1. Snap shaft inserts into upper opening of receiver

mounting bracket.

2. Choose the proper spacers (supplied with your order) to allow

receiver nosepiece to extend 1/8” to 1/4” beyond face of receiver

mounting bracket (Figure 1).

3. Secure receiver and faceplate to receiver mounting bracket

with spacers and shaftnuts as shown.

4. Attach receiver control knobs.

5. Bend rear support strap upward and secure to rear of

receiver with hardware supplied with receiver (Figure 2).

6. If not installing an equalizer, snap EQ cover plate into

lower opening of mounting bracket.

1/8” -1/4”

▲

Spacer

Shaftnuts (supplied

with receiver)

Tools Required

▲

Rear Support Strap

Deep Socket

(size depends

upon receiver)

Faceplate

Shaft Receiver Assembly

Philips

Screwdriver

FIGURE 2

FIGURE 1

Spacers

(supplied with

your order)

EQ Cover Plate

Shaft Inserts

Adjustable

Wrench