User Manual

TOYOTA 4-Runner 1990-95
Pickup (standard cab) 1989-2002 / Pickup (extended cab) 1989-2002
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
(3) screws and (1) 10mm bolt from the driver's
side speaker panel and remove the panel.
Remove (1) 10mm bolt from the bottom of the
passenger's side speaker panel. Remove (3)
screws from the side of the panel and remove
the glove box. Remove (4) screws securing
the factory head unit and disconnect the
wiring.
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
the climate control knobs. Unclip the climate
control trim panel and remove (2) Phillips
screws exposed. Unclip the dash trim bezel,
lift up on the bezel and remove.
DOUBLE DIN APPLICATIONS: Skip to the
Installation Instructions for ALL VEHICLES
on Page #3.
SINGLE DIN APPLICATIONS: Cut and
remove the bottom portion of the Radio
Housing (see Fig. A) and Faceplate (see
Fig. B). Skip to the Installation Instructions
for ALL VEHICLES on Page #3.
1 2
1
2
TOYOTA Tacoma 1995-02
1
Disconnect the negative battery terminal to
prevent an accidental short circuit. Pull the
cupholder out. Unclip the radio trim bezel
and remove. Remove (4) screws securing
the factory head unit and disconnect the
wiring.
TOYOTA T-100 1993-98
1
Cut and remove the middle mounting legs on
the Radio Housing. Skip to the Installation
Instructions for ALL VEHICLES on Page #3.
Cut and remove the middle mounting legs on
the Radio Housing. Skip to the Installation
Instructions for ALL VEHICLES on Page #3.
2
2
Disconnect the negative battery terminal to
prevent an accidental short circuit. Open
the center armrest door. Unclip the parking
brake trim panel. Unclip the gear shifter trim
panel and remove the panel. Remove the
climate control knobs. Remove the climate
control trim plate and (2) Phillips screws
exposed. Unclip the dash trim bezel and
remove. Remove (4) Phillips screws
securing the factory head unit and
disconnect the wiring.
TOYOTA 4-Runner 1989-2002
1
Fig. A
Fig. B
Cut and remove the middle mounting legs on
the Radio Housing. Skip to the Installation
Instructions for ALL VEHICLES on Page #3.
2