User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 99-8155 Single DIN Installation Kit for Select 1997-2001 Lexus ES 300

INSTALLATION INSTRUCTIONS FOR PART 99-8155

Phillips Screwdriver • Small Flat Blade Screwdriver • Socket Wrench

1-800-221-0932 www.metraonline.com

KIT FEATURES

• DIN Head Unit Provision with Pocket

• ISO DIN Head Unit Pro

vision with Pocket

( A) Radio Housing • ( B) Radio Housing Brackets • ( C) Trim Plate • ( D) ISO Brackets

KIT COMPONENTS

TOOLS REQUIRED:

99-8155

APPLICATIONS

1997-2001 Lexus ES Series

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-8155 APPLICATIONS 1997-2001 Lexus ES Series 99-8155 KIT FEATURES • DIN Head Unit Provision with Pocket • ISO DIN Head Unit Provision with Pocket KIT COMPONENTS ( A) Radio Housing • ( B) Radio Housing Brackets • ( C) Trim Plate • ( D) ISO Brackets A B C D TOOLS REQUIRED: Phillips Screwdriver • Small Flat Blade Screwdriver • Socket Wrench 1-800-221-0932 www.metraonline.
PAGE 2
99-8155 TABLE OF CONTENTS Dash Disassembly 1997-2001 Lexus ES Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Assembly 1997-2001 Lexus ES Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 DIN Head Unit Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . 3 ISO DIN Head Unit Provision with Pocket . . . . . . . . . . . . . . . . . . 4 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
99-8155 DASH DISASSEMBLY 1997-2001 LEXUS ES SERIES FM2 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Carefully pry out and remove small trim panel between ashtray and bottom of climate control. (Figure A) 3 Using a small flat blade screwdriver gently pry out on the top of the A/C vent assembly (including clock) and remove. (Figure B) B 4 Remove (4) retaining screws securing factory radio/climate control assembly to remove.
PAGE 4
99-8155 KIT ASSEMBLY 1997-2001 LEXUS ES SERIES A 1 Attach the corresponding bracket to the factory climate control using the factory hardware. (Figure A) 2 Slide the factory climate control and bracket assembly onto the 99-8155 housing until side clips engage.
PAGE 5
99-8155 KIT ASSEMBLY 1997-2001 LEXUS ES SERIES DIN HEAD UNIT PROVISION A 1 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure A) 2 Slide the aftermarket head unit into the cage and secure.
PAGE 6
99-8155 KIT ASSEMBLY 1997-2001 LEXUS ES SERIES ISO DIN HEAD UNIT PROVISION A 1 Mount the ISO brackets to the radio with the screws supplied with the unit. (Figure A) 2 Slide the head unit into the radio opening until the side clips engage. (Figure B) 3 Snap the trim plate into the radio housing.
PAGE 7
99-8155 FINAL ASSEMBLY FINAL ASSEMBLY 1 Locate the factory wiring harness in the dash and make the connection as shown. Metra recomends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative battery terminal and test the unit for proper operation. 3 Reassemble radio and dash assemblies in reverse order of disassembly.
PAGE 8
INST998155 1-800-221-0932 REV. 03/20/06 www.metraonline.