User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 99-8159S Double DIN Dash Kit for Select Lexus RX Vehicles

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 1/2/2014 INST99-8159S

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 99-8159S

• ISO DIN radio provision with pocket

• Double DIN radio provisions

• Painted silver to match factory finish

• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws • E) Resistor

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • TYTO-01 - Toyota/Lexus interface

Antenna Adapter: • Not required

• Panel removal tool • Phillips screwdriver • Socket wrench

TOOLS REQUIRED

Lexus RX330 2004-2006/RX350 2007-2009/

RX400H 2006-2009

99-8159S

A B C D

Dash Disassembly

– Lexus RX350 2007-2009 ..................................... 2

– Lexus RX400H 2006-2009 ................................... 2

– Lexus RX330 2004-2006 ..................................... 2

Kit Assembly

– ISO DIN radio provision with pocket ...................... 2

– Double DIN radio provisions ................................. 3

Wiring Diagram ...................................................... 3

Table of Contents

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-8159S APPLICATIONS Lexus RX330 2004-2006/RX350 2007-2009/ RX400H 2006-2009 99-8159S Table of Contents Dash Disassembly – Lexus RX350 2007-2009 ..................................... 2 – Lexus RX400H 2006-2009 ................................... 2 KIT FEATURES • ISO DIN radio provision with pocket • Double DIN radio provisions • Painted silver to match factory finish – Lexus RX330 2004-2006 .....................................
PAGE 2
99-8159S Dash Disassembly Kit Assembly 1. Unsnap and remove shifter trim. (Figure A) ISO DIN radio provision with pocket 2. Unsnap and remove power outlet panel below radio. (Figure B) 1. Mount the pocket to the radio brackets with the (4) #8 x 3/8” Phillips screws supplied. (Figure A) 3. Remove four 10 mm bolts securing radio, unsnap, and remove. (Figure C) 4. Remove two plastic snaps from factory radio and install onto radio panel. Continue to kit assembly 2.
PAGE 3
99-8159S Kit Assembly 1. Mount the radio brackets to the aftermarket radio and secure with screws supplied with the radio. (Figure A) 1. Locate the 20-way or 12-way white connector that was plugged into the factory radio. 2. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 3. Mount the new radio assembly into the dash and reassemble dash in reverse order of disassembly.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 99-8159S KNOWLEDGE IS POWER REV. 1/2/2014 INST99-8159S Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-8159S APLICACIONES Lexus RX330 2004-2006/RX350 2007-2009/ RX400H 2006-2009 99-8159S Indice Desmontaje del tablero – Lexus RX350 2007-2009 ..................................... 2 – Lexus RX400H 2006-2009 ................................... 2 CARACTERÍSTICAS DEL KIT • Provisión de radio ISO DIN con bolsillo • Provisiones de radio doble DIN • Painted silver to match factory finish – Lexus RX330 2004-2006 .....................................
PAGE 6
99-8159S Desmontaje del tablero Ensamble del kit 1. Suelte y retire la moldura de la palanca de velocidades. (Figura A) Provisión de radio ISO DIN con bolsillo 2. Quite a presión el panel del tomacorriente debajo del radio. (Figura B) 1. Monte el bolsillo en los soportes del radio con los (4) tornillos Phillips #8 de 3/8” suministrados. (Figura A) 3. Quite los cuatro pernos de 10mm que sujetan el radio, suelte a presión y quite. (Figura C) 4.
PAGE 7
99-8159S Ensamble del kit 1. Monte los soportes del radio en el radio de mercado secundario y sujételos con los tornillos suministrados con la unidad. (Figura A) 2. Ubique el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda el uso de adaptadores adecuados de acoplamiento de Metra y/o de AXXESS.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-8159S EL CONOCIMIENTO ES PODER sus habilidades deIS instalación y KMejore NOWLEDGE POWER REV. 1/2/2014 INST99-8159S Enhance your installation and fabrication skills by fabricación inscribiéndose en la escuela de enrolling in the most recognized and respected dispositivos electrónicos móviles más reconocida mobile electronics school in our industry. y respetada de nuestra industria. en Log onto www.installerinstitute.