User Manual

Snap the ISO trim-plate onto the front

of the assembled radio and housing.

(Figure B)

NOTE: To remove the radio unsnap and remove the ISO trim-plate.

Using a flat blade screwdriver disengage ISO brackets from the radio

housing and slide radio out of radio housing.

99-8207

KIT ASSEMBLY

Continue to final assembly.

Align the holes in the ISO brackets with

the holes in the radio. Mount the

brackets to the radio using screws

supplied with the radio.

(Figure A)

Slide the radio bracket assembly into

the radio housing until it snaps into

place.

(Figure B)

ISO DIN HEAD UNIT PROVISION WITH POCKET