User Manual

ManualsBrandsMetra Manualschassis components99-8216

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 4/16/2014 INST99-8216

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 99-8216

• DINradioprovisionwithpocket

• ISODINradioprovisionwithpocket

•A)Radiohousing•B)Housingbrackets-3door•C)Housingbrackets-4door•D)ISOSnapinbrackets

•E)Trimplate

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS(soldseparately)

WiringHarness:•70-1761Toyotaharness1987-up•TYTO-01Toyotaampinterface2003-up

AntennaAdapter:•Notrequired

•Panelremovaltool•Phillipsscrewdriver•Smallflatbladescrewdriver•Socketwrench

TOOLS REQUIRED

Toyota Yaris 2007-2011

(Excludes models equipped with power package)

99-8216

A B C D

Dash Disassembly

– ToyotaYaris2007-2011................................ 2

Kit Assembly

– DINradioprovisionwithpocket.................2-3

– ISO DINradioprovisionwithpocket.............. 3

Table of Contents

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-8216 APPLICATIONS Table of Contents Toyota Yaris 2007-2011 (Excludes models equipped with power package) Dash Disassembly 99-8216 – Toyota Yaris 2007-2011 ................................ 2 Kit Assembly KIT FEATURES • DIN radio provision with pocket • ISO DIN radio provision with pocket – DIN radio provision with pocket .................2-3 – ISO DIN radio provision with pocket ..............
PAGE 2
99-8216 Dash Disassembly Kit Assembly 1. Unclip the bottom trim panel located underneath the A/C Controls. (Figure A) DIN radio provision with pocket 2. Unclip the two side trim panels that surround the A/C controls and radio. (Figure A) 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 3.
PAGE 3
99-8216 Kit Assembly DIN radio provision with pocket (Continued) 4. Slide the aftermarket radio into the cage until it snaps into place. (Figure C) 5. Reassemble dash in reverse order of disassembly. ISO DIN radio provision with pocket 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 99-8216 KNOWLEDGE IS POWER REV. 4/16/2014 INST99-8216 Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.