User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 99-8217 Double DIN or Single DIN Installation Kit for 2006-2009 Toyota Rav4

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 2/27/2014 INST99-8217

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 99-8217

• DIN radio provision with pocket

• ISO DIN radio provision with pocket

• Double DIN radio provision

• Painted Matte Black to match OEM factory finish

• A) Radio housing • B) ISO Snap in brackets • C) Trim plate • D) Double DIN brackets

• E) Double DIN trim plate • F) Pocket • G) (2) White panel clips and (2) Yellow panel clips

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness:

• 70-1761 - Toyota harness 1987-up

• TYTO-01 - Toyota JBL amp interface 2003-up

Antenna Adapter:

• Not required

• Panel removal tool • Phillips screwdriver

• Small flat blade screwdriver • Socket wrench

TOOLS REQUIRED

Toyota RAV 4 2006-up

99-8217

See application list inside

B EC D

F G

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-8217 APPLICATIONS See application list inside WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: • 70-1761 - Toyota harness 1987-up • TYTO-01 - Toyota JBL amp interface 2003-up Antenna Adapter: • Not required Toyota RAV 4 2006-up 99-8217 KIT FEATURES • DIN radio provision with pocket • ISO DIN radio provision with pocket • Double DIN radio provision • Painted Matte Black to match OEM factory finish TOOLS REQUIRED • Panel removal tool • Phillips screwdrive
PAGE 2
99-8217 Dash Disassembly 99-8217 Table of Contents Toyota RAV 4 2006-up Dash Disassembly 1. Unclip and remove the (2) side panels on the left and right side of the factory radio. (Figure A) – Toyota RAV4 2006-up ..........................................................................................2 Kit Preparation 2. Remove (4) 10mm screws securing the radio. (Figure B) – Toyota RAV4 2006-up ..........................................................................................
PAGE 3
Kit Preparation 99-8217 Kit Assembly 99-8217 Toyota RAV 4 2006-up DIN radio provision with pocket 1. Attach (2) white panel clips and (2) yellow panel clips to rear of radio housing where shown. (Figure A) Note: OEM factory clips can also be used. Continue to kit assembly YELLOW CLIPS INSTALL WHITE CLIPS WHITE CLIPS 1. Slide the DIN cage into the radio housing and secure by bending the metal locking tabs outward. (Figure A) 2. Slide the aftermarket radio into the cage until it snaps into place.
PAGE 4
Kit Assembly 99-8217 ISO mount radio provision with pocket 1. Mount the ISO brackets to the radio using the screws supplied with the radio. (Figure A) 2. Slide the aftermarket radio into the radio opening until the side clips snap into place. (Figure B) 3. Snap the pocket into the radio housing. (Figure B) 4. Snap the trim plate onto the front of the radio housing assembly. (Figure C) 5. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS.
PAGE 5
Kit Assembly 99-8217 Double DIN radio provision 1. Cut and remove center divider from radio housing. (Figure A) 2. Snap the Double DIN brackets to the inside edge of the radio housing. (Figure B) 3. Slide the Double DIN radio into the Double DIN bracket/radio housing assembly and secure the radio to the assembly using the screws supplied with the radio. (Figure C) 4. Snap the Double DIN trim-plate onto the front of the housing/radio assembly. (Figure C) Remove (Figure A) (Figure C) 5.
PAGE 6
99-8217 Notes
PAGE 7
99-8217 Notes
PAGE 8
INSTALLATION INSTRUCTIONS FOR PART 99-8217 KNOWLEDGE IS POWER REV. 2/27/2014 INST99-8217 Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.