User Manual

7
Kit Assembly 99-8218
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Mount the ISO Brackets to the radio
with the screws supplied with the radio.
(Figure A)
3. Slide the radio into the radio opening
until the side clips engage. (Figure B)
4. Snap the Trim plate into the Radio
Housing. (Figure B)
5. Snap the pocket into the radio housing.
(Figure B)
6. Align the small legs on the bottom of
the radio housing with the slots in the
top of the climate control. Then slide
the climate control sideways to engage
together. (Figure C)
Continued on next page
ISO radio provision with pocket
(Figure A)
(Figure B)
(Figure C)