Owner's Manual

REV. 4/29/2019 INST99-8220
3
DASH DISASSEMBLY
With column shifter
1. Remove (2) plastic Phillips screws from
each side of the trim panel below the
cup holder, then unclip and remove the
panel. (Figure A)
2. Pull the cup-holder out, then depress
the clip from each side to remove the
cup-holder from the dash. (Figure B)
3. Remove (4) Phillips screws securing the
cup-holder assembly to the dash, then
unclip and remove the assembly. (Figure C)
4. Unclip the climate control assembly and
set aside. (Figure D)
5. Remove (4) 10mm bolts securing the
bottom of the radio. (Figure E)
6. Unclip the right side of the instrument
panel trim to allow room for the radio to
be removed in the following step.
7. Unclip the radio from the dash. Slide
the radio out, then unplug and remove
radio. (Figure F)
Continue to Kit Assembly
(Figure A) (Figure C)
(Figure D) (Figure E) (Figure F)
(Figure B)