Owner's Manual

1.800.221.0932
|
MetraOnline.com
4
DIN radio provision with pocket
1. Remove the metal DIN sleeve from the
aftermarket radio.
2. Slide the sleeve into the radio housing
and secure by bending the metal locking
tabs outward. (Figure A)
3. Slide the radio back into the sleeve until
it snaps into place. (Figure B)
4. Snap the pocket into the radio housing.
(Figure C)
5. Locate the factory wiring harness and
antenna connector in the dash. Metra
recommends using the proper mating
adapter from Metra or AXXESS. Test the
radio for proper operation.
6. Reassemble the dash in reverse order of
disassembly to complete the installation .
KIT ASSEMBLY
(Figure A)
(Figure C)
(Figure B)