User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 99-8232B 2012-Up Toyota Camry ISO Single/Double DIN Dash Installation Kit

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 1/12/2015 INST99-8232B

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Installation instructions for 99-8232B

APPLICATIONS

Table of Contents

•ISODINradioprovisionwithpocket

•DoubleDINradioprovisions

•Painted Matte Black

•A)RadioTrimPanel•B)Pocket•C)PanelClips•D)(4)#8x3/8”Phillipsscrews

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS(soldseparately)

WiringHarness:•70-1761•TYTO-01•AX-LCD

AntennaAdapter:•40-LX11

•Panelremovaltool•Phillipsscrewdriver•Socketwrench

TOOLS REQUIRED

Toyota Camry 2012-2014

99-8232B

B C D

Dash Disassembly

– ToyotaCamry2012-2014.................................... 2

Kit Assembly

–

ISO DINradioprovisionwithpocket...................... 3

–

DoubleDINradioprovision................................... 4

Summary of content (8 pages)

PAGE 1
Installation instructions for 99-8232B APPLICATIONS Toyota Camry 2012-2014 99-8232B Table of Contents Dash Disassembly –. Toyota Camry 2012-2014..................................... 2 Kit Assembly –. ISO DIN radio provision with pocket....................... 3 KIT FEATURES • ISO DIN radio provision with pocket • Double DIN radio provisions • Painted Matte Black –. Double DIN radio provision....................................
PAGE 2
99-8232B Dash Disassembly 1. Unclip and remove the A/C vent register. (Figure A) 5. Unclip and remove the top of the center console including the cup holders. (Figure E) 2. Unclip and remove the panel above the radio including the clock. (Figure B) Note: Be very careful with center clip on panel it is very fragile. 3. Unclip and remove (1) trim panel from each side of the pocket below the radio/climate control assembly. (2 panels total) (Figure C) 6.
PAGE 3
99-8232B Dash Disassembly Kit Assembly ISO DIN radio provision with pocket 8. Remove (1) Phillips screw from each side of the pocket below the radio/climate control assembly. (2 screws total) (Figure G) 1. Remove the factory panel clips and attach to the Metra radio trim panel in the same order. This kit comes with six panel clips that will only work with the upper six locations around the vents. The two lower clips must be factory. 9. Unclip and remove the pocket. (Figure G) 10.
PAGE 4
Installation instructions for 99-8232B Kit Assembly Double DIN radio provision 1. Remove the factory panel clips and attach to the Metra radio trim panel in the same order. This kit comes with six panel clips that will only work with the upper six locations around the vents. The two lower clips must be factory. 5. Mount the radio/climate control assembly into the dash. 6. Reassemble dash in reverse order of disassembly using the 99-8232B radio trim panel. REV. 1/12/2015 INST99-8232B 2.
PAGE 5
Instrucciones de instalación para 99-8232B APLICACIONES Tabla de contenido Toyota Camry 2012-2014 99-8232B Desmontaje del tablero –. Toyata Camry 2012-2014..................................... 2 Ensamble del kit CARACTERÍSTICAS DEL KIT • Provisión de unidad central ISO DIN con cavidad • Provisiones de unidad central DDIN • Pintura negro mate –. Provisión de unidad central ISO DIN con cavidad..... 3 –. Provisión de unidad central DDIN............................
PAGE 6
99-8232B Desmontaje del tablero 1. Desenganche y quite el registro de la rejilla del aire acondicionado. (Figura A) 5. Desenganche y retire la parte superior de la consola central, incluyendo los portavasos. (Figura E) 2. Desenganche y quite el panel de arriba del radio, incluyendo el reloj. (Figura B) Nota: Tenga mucho cuidado con el gancho central del panel, ya que es muy frágil. 6.
PAGE 7
99-8232B Desmontaje del tablero Ensamble del kit Provisión de unidad central ISO DIN con cavidad 1. Quite los ganchos del panel de fábrica y colóquelos en el panel de moldura del radio Metra en el mismo orden. Este kit viene con seis ganchos de panel que únicamente funcionan con los seis lugares superiores alrededor de las rejillas. Los dos ganchos inferiores deben ser de fábrica. 8. Quite (1) tornillo Phillips de cada lado de la cavidad debajo del conjunto del radio/control de clima.
PAGE 8
Instrucciones de instalación para 99-8232B Ensamble del kit Provisión de unidad central DDIN 1. Quite los ganchos del panel de fábrica y colóquelos en el panel de moldura del radio Metra en el mismo orden. Este kit viene con seis ganchos de panel que únicamente funcionan con los seis lugares superiores alrededor de las rejillas. Los dos ganchos inferiores deben ser de fábrica. 5. Monte el conjunto de radio/control de clima en el tablero. 6.