User Manual

1.800.221.0932
|
MetraOnline.com
2
1. Unclip and remove the a/c vents on each
side of the factory radio. (Figure A)
2. Unclip and remove the trim panel on top
of the factory radio. (Figure B)
3. Remove (4) Phillips screws securing the
radio, then unclip and remove it.
(Figure C)
Continue to Kit Preparation
1. Attach the shallow pocket to the radio
housing trim panel using (4) #8 x 3/8”
Phillips screws provided. (Figure A)
2. Attach the (4) panel clips to the radio
housing trim panel. (Figure B)
Continue to Kit Assembly
(Figure B)
(Figure A)
DASH DISASSEMBLY KIT PREPARATION
(Figure A)
(Figure B)
(Figure C)