Installation Guide

ManualsBrandsMetra ManualsAudioMetra Kia Forte 2014-Up Car Dash Kit

APPLICATIONS

REV. 11/14/2017 INST99-7356B

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Table of Contents

INSTALLATION INSTRUCTIONS FOR PART 99-7356B

U.S. PATENT # D725,095

METRA. The World’s best kits.

metraonline.com

• ISO DIN radio provision with pocket

• Painted matte black

• A) Radio Trim Panel • B) Brackets • C) Pocket • D) (6) #8 x 3/8” Phillips Screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7304

Antenna Adapter: • Not Required

• Panel removal tool • Phillips screwdriver

TOOLS REQUIRED

Kia Forte 2014-up

99-7356B

A C

B D

Dash Disassembly

– Kia Forte 2014-up ................................................ 2

Kit Assembly

– ISO DIN radio provision with pocket ...................... 3

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-7356B U.S. PATENT # D725,095 APPLICATIONS Table of Contents Kia Forte 2014-up 99-7356B Dash Disassembly –. Kia Forte 2014-up................................................. 2 Kit Assembly –. ISO DIN radio provision with pocket....................... 3 KIT FEATURES • ISO DIN radio provision with pocket • Painted matte black KIT COMPONENTS • A) Radio Trim Panel • B) Brackets • C) Pocket • D) (6) #8 x 3/8” Phillips Screws REV.
PAGE 2
99-7356B Dash Disassembly 1. Unsnap and remove the small trim below the climate controls, then remove one Phillips screw from the radio trim panel. (Figure A) 2. Unsnap and remove the radio trim panel. (Figure B) 3. Remove the panel clips from the factory radio, save them for the kit assembly. 4. Unscrew the factory hazard button, save it for the kit assembly. 5. Remove four Phillips screws to remove the factory radio.
PAGE 3
99-7356B Kit Assembly ISO DIN radio provision 1. Attach the factory panel clips to the radio housing (Figure A) 2. Attach the factory hazard button to the radio trim panel with (2) of the #8 x 3/8” screws provided. (Figure A) 3. Attach the pocket to the radio brackets with (4) of the #8 x 3/8” screws provided. (Figure B) 4. Slide the radio into the radio brackets/pocket assembly and secure with the screws supplied with the radio. (Figure C) 5. Locate the factory wiring harness in the dash.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 99-7356B KNOWLEDGE IS POWER REV. 11/14/2017 INST99-7356B Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.® metraonline.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7356B U.S. PATENT # D725,095 APLICACIONES Indice Kia Forte 2014 y mas 99-7356B Desmontaje del tablero –. Kia Forte 2014 y mas............................................ 2 Ensamble del kit –. Provisión de radio ISO DIN con cavidad................... 3 CARACTERÍSTICAS DEL KIT • Provisión de radio ISO DIN • Pintura negro mate COMPONENTES DEL KIT • A) Panel de moldura para radio • B) Soportes • C) Cavidad • D) (6) tornillos Phillips #8 de 3/8” REV.
PAGE 6
99-7356B Desmontaje del tablero 1. Suelte a presión y quite la moldura pequeña de abajo de los controles del clima, luego quite un tornillo Phillips del panel de la moldura del radio. (Figura A) 2. Suelte a presión y quite el panel de la moldura del radio. (Figura B) 3. Quite los ganchos del radio de fábrica y guárdelos para ensamblar el kit. 4. Desenrosque el botón de las luces intermitentes de fábrica y guárdelo para ensamblar el kit. 5. Quite cuatro tornillos Phillips para quitar el radio de fábrica.
PAGE 7
99-7356B Ensamble del kit 5. Ubique el arnés de cableado de fábrica en el tablero. Metra recomienda el uso de un adaptador adecuado de acoplamiento de Metra o de AXXESS. Vuelva a conectar la terminal negativa de la batería y pruebe la unidad para verificar que funcione correctamente. Provisión de radio ISO DIN 1. Coloque los ganchos del panel de fábrica en la carcasa del radio (Figura A) 2.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7356B EL CONOCIMIENTO ESOWER PODER K NOWLEDGE IS P Mejore sus habilidades de instalación y fabricación REV. 11/14/2017 INST99-7356B Enhance your installation and fabrication skills by enrolling in the en most recognized and respected inscribiéndose la escuela de dispositivos electrónicos mobile school in our industry. móvileselectronics más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.