Installation Guide

ManualsBrandsMetra ManualsAudioMetra Kia Sedona Stereo Installation Kit

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 5/21/2015 INST99-7365B

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Installation instructions for part 99-7365B

• ISODINradioprovisionwithpocket

• Painted matte black

•A)Radiotrimpanel•B)Brackets•C)Pocket•D)(4)#8x3/8”Phillipsscrews

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS(soldseparately)

WiringHarness:•70-7304

AntennaAdapter:•Notrequired

•Phillipsscrewdriver•Panelremovaltool

TOOLS REQUIRED

Kia Sedona 2015-up

99-7365B

A CB D

Dash Disassembly

– KiaSedona2015-up............................................ 2

Kit Assembly

– ISO DINradioprovisionwithpocket...................... 3

Table of Contents

Summary of content (8 pages)

PAGE 1
Installation instructions for part 99-7365B Kia Sedona 2015-up 99-7365B Table of Contents Dash Disassembly – Kia Sedona 2015-up ............................................ 2 Kit Assembly – ISO DIN radio provision with pocket...................... 3 KIT FEATURES • ISO DIN radio provision with pocket • Painted matte black KIT COMPONENTS • A) Radio trim panel • B) Brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws REV.
PAGE 2
99-7365B Dash Disassembly 1. Unclip the trim flap on the top of the steering column. (Figure A) 2. Unclip and remove the bezel surrounding the radio and instrument cluster. (Figure B) 3. Remove (4) screws securing the radio, unplug the radio from the factory radio and antenna connectors.
PAGE 3
99-7365B Kit Assembly ISO DIN radio provision with pocket 4. Snap the radio housing trim panel into the factory trim bezel from the back side of the bezel. (Figure C) 1. Mount the pocket to the radio brackets with the four of the #8 x 3/8” Phillips screws supplied. (Figure A) 5. Locate the factory wiring harness and antenna plug in the dash and make all necessary connections to the new radio. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 2.
PAGE 4
Installation instructions for part 99-7365B KNOWLEDGE IS POWER REV. 5/21/2015 INST99-7365B Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7365B Indice Kia Sedona 2015 y mas 99-7365B Desmontaje del tablero – Kia Sedona 2015 y mas ....................................... 2 Ensamble del kit – Provisión de radio ISO DIN con cavidad .................. 3 CaraCterístiCas del kit • Provisión de radio ISO DIN con cavidad • Pintura negro mate Componentes del kit • A) Panel de moldura para radio • B) Soportes • C) Cavidad • D) (4) tornillos Phillips #8 de 3/8” REV.
PAGE 6
99-7365B Desmontaje del tablero 1. Desenganche las pestañas de la moldura de la parte superior de la columna de dirección. (Figura A) 2. Desenganche y quite la moldura que rodea el radio y el conjunto de instrumentos. (Figura B) 3. Retire los (4) tornillos que sujetan el radio, desconecte el radio de los conectores de la antena y el radio de fábrica.
PAGE 7
99-7365B Ensamble del kit Provisión de radio ISO DIN con cavidad 5. Localice el arnés de cableado de fábrica y el conector de la antena en el tablero y haga todas las conexiones necesarias al radio. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. 1. Monte la cavidad en los soportes del radio con los cuatro tornillos Phillips #8 x 3/8” suministrados. (Figura A) 2. Quite la manga metálica “DIN” y el anillo de moldura del radio de mercado secundario. 3.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7365B EL CONOCIMIENTO ESOWER PODER K NOWLEDGE IS P Mejore sus habilidades de instalación y fabricación REV. 5/21/2015 INST99-7365B Enhance your installation and fabrication skills by enrolling in the en most recognized and respected inscribiéndose la escuela de dispositivos electrónicos mobile school in our industry. móvileselectronics más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.