Installation Instructions

ManualsBrandsMetra ManualsAudioMetra Stereo Installation Kit

REV. 6/17/2016 INST99-7369B

INSTALLATION INSTRUCTIONS FOR PART 99-7369B

METRA. The World’s best kits.

™

metraonline.com

CAUTION!

All accessories, switches, climate controls panels,

and especially air bag indicator lights must be connected before

cycling the ignition. Also, do not remove the factory radio with

the key in the on position, or while the vehicle is running.

• ISO DIN radio provision with pocket

• Painted matte black

• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (2) #8 x 3/8” Phillips screws

KIT FEATURES

KIT COMPONENTS

• Panel removal tool • Phillips screwdriver

• Socket wrench

TOOLS REQUIRED

Hyundai Tucson 2016-up

99-7369B

Table of Contents

B C

Dash Disassembly ..................................................2

Kit Assembly ...........................................................3

WIRING & ANTENNA CONNECTIONS (sold separately)

Wire harness: • 70-7304, HYBL-03 (nav models), HYBL-04

Antenna adapter: • Not required

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-7369B Table of Contents Hyundai Tucson 2016-up 99-7369B Dash Disassembly...................................................2 Kit Assembly............................................................3 KIT FEATURES • ISO DIN radio provision with pocket • Painted matte black KIT COMPONENTS • A) Radio trim panel • B) Radio brackets • C) Pocket • D) (2) #8 x 3/8” Phillips screws REV.
PAGE 2
99-7369B Dash Disassembly 1. Unsnap and remove the trim panel above the radio and instrument cluster. (Figure A) 2. Remove (3) Phillips screws and unsnap the radio trim panel including the vents. (Figure B) 3. Remove (4) Phillips screws to remove the factory radio.
PAGE 3
99-7369B Kit Assembly 1. Remove (2) screws from each vent, attach them into the radio trim panel, and then secure using the same screws. 6. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or AXXESS. Test the radio for proper operation. 2. Remove (4) panel clips and then attach them onto the radio trim panel 3.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 99-7369B IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling. KNOWLEDGE IS POWER REV.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7369B Indice Hyundai Tucson 2016 y mas 99-7369B Desmontaje del tablero................................................2 Ensamble del kit.............................................................3 CARACTERÍSTICAS DEL KIT • Provisión de radio ISO DIN con cavidad • Pintura de negra mate COMPONENTES DEL KIT • A) Panel de la moldura del radio • B) Soportes del radio • C) Cavidad • D) (2) tornillos Phillips #8 x 3/8” REV.
PAGE 6
99-7369B Desmontaje del tablero 1. Suelte a presión y retire el panel de la moldura de arriba del radio y el conjunto de instrumentos. (Figura A) 2. Quite los (3) tornillos Phillips y suelte a presión el panel de la moldura del radio incluyendo las rejillas. (Figura B) 3. Quite los (4) tornillos Phillips para quitar el radio de fábrica.
PAGE 7
99-7369B Ensamble del kit 1. Quite los (2) tornillos de cada rejilla, únalos al panel de la moldura del radio y luego sujételos usando los mismos tornillos. 6. Localice el arnés de cableado de fábrica y el conector de la antena en el tablero y realice todas las conexiones necesarias al radio. Metra recomienda el uso de adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. Pruebe el radio para verificar si funciona bien. 2.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7369B IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente como se indica en las instrucciones. Por favor tenga el vehículo desarmado y listo para ejecutar los pasos de resolución de problemas antes de llamar.