Installation Instructions

REV. 10/18/2018 INST99-7527S
5
DIN radio provision with pocket
1. Remove the metal DIN sleeve from the
aftermarket radio.
2. Slide the sleeve into the upper portion
of the radio housing , then secure by
bending the metal locking tabs outward.
(Figure A)
3. Slide the radio back into the sleeve until
it clicks in. (Figure B)
4. Snap the pocket into the lower portion of
the radio housing. (Figure C)
(Figure B)
(Figure C)(Figure A)
KIT ASSEMBLY
5. Locate the factory wiring harness and
connector in the dash and complete
all necessary connections to the radio.
Metra recommends using the proper
mating adapter from Metra and/
or Axxess. Test the radio for proper
operation.
6. Reassemble the dash in the reverse
order of disassembly using the 99-7527S
radio housing assembly to complete
the installation.