Installation Instructions

1.800.221.0932
|
MetraOnline.com
6
ISO DIN radio provision with pocket
1. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
2. Secure the ISO brackets to the radio
using the screws supplied with the
radio. (Figure A)
3. Slide the radio into the upper portion
of the radio housing until it snaps into
place. (Figure B)
4. Snap the trim plate onto the front of the
radio housing . (Figure C)
5. Snap the pocket into the bottom portion
of the radio housing . (Figure D)
(Figure B) (Figure D)
(Figure A) (Figure C)
KIT ASSEMBLY
6. Locate the factory wiring harness and
connector in the dash and complete
all necessary connections to the radio.
Metra recommends using the proper
mating adapter from Metra and/or
Axxess. Test the radio for
proper operation.
7. Reassemble the dash in the reverse
order of disassembly using the 99-7527S
radio housing assembly to complete
the installation.
Right side clip