Installation Guide

ManualsBrandsMetra ManualsAudioMetra Car Stereo Installation Kit

INSTALLATION INSTRUCTIONS FOR PART 99-7604

KIT FEATURES

• DIN Radio Provision

• ISO Mount Radio Provision

• Double DIN Radio Provision

• Stacked ISO Mount Units Provision

• Painted To Match Factory Dash

99-7604= SILVER

99-7604B= BLACK

99-7604T=TAN

A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Pocket • E) Double DIN Brackets

• F) Double DIN Trim Plate • G) Top Radio Housing Bracket • H) (2) #8 X 3/8” Phillip Screws

• I) Climate Control Cable

KIT COMPONENTS

Hook Tool • Panel Removal Tool • (2) Small Flat Blade Screwdrivers

• Phillips Screwdriver • Socket set

1-800-221-0932

TION

www.metraonline.com

TOOLS REQUIRED:

APPLICATIONS

INFINITI G35

2003-2004

99-7604/99-7604B/

99-7604T

Summary of content (12 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-7604 APPLICATIONS INFINITI G35 2003-2004 99-7604/99-7604B/ 99-7604T KIT FEATURES • DIN Radio Provision • ISO Mount Radio Provision • Double DIN Radio Provision • Stacked ISO Mount Units Provision • Painted To Match Factory Dash 99-7604= SILVER 99-7604B= BLACK 99-7604T=TAN KIT COMPONENTS A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Pocket • E) Double DIN Brackets • F) Double DIN Trim Plate • G) Top Radio Housing Bracket • H) (2) #8 X 3/8” Phillip Screws
PAGE 2
99-7604 TABLE OF CONTENTS Dash Disassembly - INFINITI G35 2003-2004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1,2,3 Kit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Kit Assembly - DIN Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - ISO Mount Radio Provision with Pocket . . . . . . . . . . .. . . . . . . . . . . . . . . . . . 6 - Double DIN Radio Provision .
PAGE 3
99-7604 DASH DISASSEMBLY INFINITI G35 2003-2004 1 Disconnect the negative battery terminal to prevent an accidental short circuit. A 1 2 Unclip the collar below the shift knob and slide down. Using a small screwdriver or hook tool remove the spring clip to release and remove the shift knob. (Figure A) 3 Unclip the cup holder/shifter trim panel. Unplug and remove panel. (Figure B) B 4 Remove (2) Phillips screws from the bottom of the radio/climate control panel.
PAGE 4
99-7604 DASH DISASSEMBLY INFINITI G35 2003-2004 8 Open glove box and remove (4) Phillips screws from the top edge of box opening. (Figure F) F 9 Unclip and remove the black cover panel below glove box and remove (1) Phillips screw from bottom of glove box exposed on left side next to accessory plug panel. 10 Remove (2) Phillips screws from the accessory plug panel then unclip and remove the panel. (Figure G) G 11 Unclip and remove the trim panel surrounding the clock and display on top of the dash.
PAGE 5
99-7604 DASH DISASSEMBLY INFINITI G35 2003-2004 K 14 Unsnap radio/climate control panel including climate control vents at the top left and right and pocket assembly. Unplug and remove panel. (Figure K) 16 Remove (2) Phillips screws securing the pocket to the radio/climate control panel and remove pocket. (Retain pocket for use during kit assembly.) 17 Use (2) small flat blade screwdrivers to gently pry the vents from radio/climate control panel to remove. (Retain vents for use during kit assembly.
PAGE 6
99-7604 KIT PREPARATION KIT PREPARATION *Note: Refer also to the instructions included with the aftermarket radio. A 1 Attach the vents into the radio housing in the same location as the factory panel. (Figure A) 2 Secure the factory pocket removed in step 16 of the dash disassembly into the radio housing using the factory hardware. (Figure B) 3 Attach the top radio housing bracket to the radio housing using the (2) #8 X 3/8” Phillips screws provided with this kit.
PAGE 7
99-7604 KIT ASSEMBLY DIN RADIO PROVISION WITH POCKET *Note: Refer also to the instructions included with the aftermarket radio. A 1 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs outward. (Figure A) 2 Slide the aftermarket radio into the cage until it snaps into place. (Figure B) 3 Snap the pocket into the radio housing. (Figure C) Continue to final assembly.
PAGE 8
99-7604 KIT ASSEMBLY ISO MOUNT RADIO PROVISION WITH POCKET *Note: Refer also to the instructions included with the aftermarket radio. A 1 Mount the ISO Brackets to the radio with the screws supplied with the radio. (Figure A) 2 Slide the radio into the radio housing until it snaps into place. (Figure B) 3 Snap the ISO trim plate onto the front of the Radio Housing. (Figure B) 4 Snap the pocket into the radio housing. (Figure C) B Continue to final assembly.
PAGE 9
9-7604 KIT ASSEMBLY DOUBLE DIN RADIO PROVISION *Note: Refer also to the instructions included with the aftermarket radio. A 1 Cut and remove the center bar from the radio housing. (Figure A) 2 Snap the Double DIN brackets to the inside edge of the radio housing. (Figure B) 3 Slide the Double DIN radio into the bracket/trim plate assembly and secure the radio to the assembly using the screws supplied with the radio. (Figure C) B 4 Snap the Double DIN trim plate into the radio housing.
PAGE 10
99-7604 KIT ASSEMBLY STACKED ISO UNITS PROVISION *Note: Refer also to the instructions included with the aftermarket radio. A 1 Cut and remove the center bar from the radio housing. (Figure A) 2 Snap the Double DIN brackets to the inside edge of the radio housing. (Figure B) 3 Slide the stacked ISO units into the bracket/radio housing assembly and secure the units to the kit using the screws supplied with the units. (Figure C) B 4 Snap the Double DIN trim plate into the radio housing.
PAGE 11
99-7604 FINAL ASSEMBLY FINAL ASSEMBLY A (A) Strip wire ends back 1/2" B B) Twist ends together C) Solder C D) Tape D 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) 2 Re-connect the negative battery terminal and test the unit for proper operation. 3 Reassemble radio and dash assemblies in reverse order of disassembly.
PAGE 12
99-7604 INSTRUCTIONS 1-800-221-0932 REV. 08/04/08 www.metraonline.