Installation Instructions

ManualsBrandsMetra ManualsAudioMetra Honda Pilot Premium Dash Kit 2003-2008

Metra. The World’s Best Kits.

INSTALLATION INSTRUCTIONS

99-7818

Attention! Let the vehicle sit with the key

out of the ignition for a few minutes before

removing the factory radio. When testing the

aftermarket equipment, ensure that all factory

equipment is connected before cycling the

key to ignition.

KIT FEATURES

• ISO DIN radio provision with pocket

• ISO DDIN radio provision

KIT COMPONENTS

• A) “LX” trim panel • B) “EX” trim panel • C) “LX” Radio brackets • D) “EX” Radio brackets • E) Pocket • F) #8 x 3/8” Phillips screws (4)

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• 10mm socket wrench

TABLE OF CONTENTS

Dash Disassembly

– . Pilot 2003-2005 .................................................2

– . Pilot 2006-2008 (without factory NAV) ..........2

Kit Assembly

– . ISO DIN radio provision with pocket ................3

– . ISO DDIN radio provision ..................................3

WIRING & ANTENNA CONNECTIONS

(sold separately)

Wiring Harness: 70-1721

Antenna Adapter: 03-05 Not required,

06-08 40-HD10

A B C D E

Honda Pilot 2003-2005

Honda Pilot (without factory NAV) 2006-2008

Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle

speciﬁc applications

Summary of content (4 pages)

PAGE 1
99-7818 I N S TA L L AT I O N I N S T R U C T I O N S Honda Pilot 2003-2005 Honda Pilot (without factory NAV) 2006-2008 Visit MetraOnline.
PAGE 2
DASH DISASSEMBLY Pilot 2003-2005 Pilot 2006-2008 (without factory NAV) 1. Using a panel removal tool, remove the blank plate from upper right side of radio trim panel. (Figure A) 1. Remove (2) screws from the top of the instrument panel trim, and then unclip and remove the instrument panel trim. (Figure A) 2. Unsnap radio trim panel. Unplug switches and remove panel. (Figure B) 3. Remove (4) 10mm bolts securing radio, unplug and remove radio. (Figure C) (Figure A) Continue to Kit Assembly 2.
PAGE 3
KIT ASSEMBLY ISO DIN radio provision with pocket ISO DDIN radio provision Note: Select the proper radio housing for your vehicle. EX models use the (EX) Double DIN Trim Plate and (EX) brackets. LX models use the (LX) Double DIN Trim Plate and (LX) brackets Note: Select the proper radio housing for your vehicle. EX models use the (EX) Double DIN Trim Plate and (EX) brackets. LX models use the (LX) Double DIN Trim Plate and (LX) brackets 1. Clip the radio brackets onto the radio trim panel. (Figure A) 2.
PAGE 4
99-7818 I N S TA L L AT I O N I N S T R U C T I O N S If you are having difficulties with the installation of this product, contact our Tech Support line either by phone at 1-800-253-TECH, or email at techsupport@metra-autosound.com. Before doing so, look over the instruction booklet a second time and ensure that the installation was performed exactly as the instruction booklet is stated. Have the vehicle apart and ready to perform troubleshooting steps before contacting Metra/Axxess Tech Support.