Instructions

Metra. The World’s Best Kits.



INSTALLATION INSTRUCTIONS

99-873 1

Attention! Let the vehicle sit with the key

out of the ignition for a few minutes before

removing the factory radio. When testing the

aftermarket equipment, ensure that all factory

equipment is connected before cycling the

key to ignition.

KIT FEATURES

• ISO DIN radio provision with pocket

• Polished gloss black to match the factory ﬁnish

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) Pocket • D) #8 x 3/8” Phillips pan-head screws (4) • E) #8 x 3/8” Phillips ﬂat-head screws (4)

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• Torx T-20 screwdriver

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Assembly ..........................................................3

A B C D E

Mercedes Sprinter† 2019-Up

Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle

speciﬁc applications

† Excluding models with a touchscreen radio

WIRING & ANTENNA CONNECTIONS

(sold separately)

Wire Harness: See metraonline for harness and

interfacing solutions

Antenna Adapter: 40-EU10

PAGE 1
99-8731 I N S TA L L AT I O N I N S T R U C T I O N S Mercedes Sprinter† 2019-Up Visit MetraOnline.
PAGE 2
DASH DISASSEMBLY 1. Unclip and remove the radio trim panel. (Figure A) 2. Remove (4) Torx T-20 screws securing the radio and pocket assembly. Slide the assembly out, then unplug and remove. (Figure B) Continue to Kit Assembly (Figure A) 2 (Figure B) 1.800.221.0932 | MetraOnline.
PAGE 3
KIT ASSEMBLY 1. Secure the radio brackets to the radio trim panel using (4) #8 x 3/8” Phillips pan-head screws provided. (Figure A) 2. Slide the pocket into the bracket/panel assembly, then secure using (4) #8 x 3/8” Phillips flat-head screws provided. (Figure B) 3. Remove the metal DIN sleeve and trim ring from the aftermarket radio. 4. Slide the radio into the bracket/panel assembly, then secure using screws supplied with the radio. (Figure C) (Figure A) (Figure B) (Figure C) 5.
PAGE 4
99-8731 I N S TA L L AT I O N I N S T R U C T I O N S If you are having difficulties with the installation of this product, contact our Tech Support line either by phone at 386-257-1186 ext. 8300, or email at techsupport@metra-autosound.com. Before doing so, look over the instruction booklet a second time and ensure that the installation was performed exactly as the instruction booklet is stated. Have the vehicle apart and ready to perform troubleshooting steps before contacting Metra/Axxess Tech Support.