Owner's Manual

POWER OUTLET RELOCATOR
Installation Instructions
AS-PWRLODBL
KIT CONTENTS:
JAB SAW
FISH TAPE
(10FT)
IN-WALL POWER CABLE (9FT)
(ALREADY ATTACHED TO DUAL 110V IN-WALL UNIT
SCREWS
(4)
POWER CABLE (6FT)
IN-WALL HOUSING
DUAL 110V IN-WALL UNIT
MALE
CROWN
TOOLS NEEDED:
TAPE
MEASURE
PENCIL
TAPE
PHILLIPS
SCREWDRIVER
LEVEL
1
Check plug size
from your TV
2
Center between studs
3
Measure and mark the
location for holes with pencil
9FT/2.7M
MAX
X
X
4
Cut holes with
provided Jab Saw
5
Use Fish Tape to snake the Dual 110V In-Wall Unit Power
Cable into the wall with the Male Tip at the bottom. Use
tape to secure the Fish Tape if needed.
NOTE: Snake any additional AV
connection cables at this time.
(Coax cable not included)
MALE
TIP
FEMALE TIP (ALREADY
ATTACHED TO THE Dual
110V IN-WALL UNIT)
Circular shape for the
lower hole (see back
shape of the In-Wall
Housing unit)
Square shape for the
upper hole (see back
shape of the Dual
110V In-Wall unit)
(2) FASCIA HOUSINGS

Summary of content (2 pages)