User Manual

POWER OUTLET RELOCATOR
Installation Instructions continued
AS-PWRLODBL
6
At the bottom, insert Male Tip into the back
side of the In-Wall Housing unit.
7
Snap on Male Crown over the Plug Tip and
secure with screws.
=
8
Fold in Dog Ears and slide Housing into wall.
Repeat at the bottom with the Male Housing.
9
Level and screw Dog Ears until
Housing is secure. Repeat at the
bottom with the Male Housing.
10
Snap Housing Fascia onto the front of the Housing.
Repeat at the bottom with the Male Housing.
11
Plug Extension Cord into the bottom device.
Installation is now complete.
Metra Electronics Corporation, 460 Walker Street, Holly Hill, FL 32117
www.MetraOnline.com ©2016 Metra Electronics Corp.