Owner's Manual
AX-GMCL2
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 11/18/19 INSTAX-GMCL2
Product Info
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties
TABLE OF CONTENTS
Connections .........................................................2-3
Installation .............................................................3
Programming .........................................................3
GM Data Interface 2000-2013
APPLICATIONS
See inside front cover
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
•
Provides illumination, parking brake, reverse, and speed sense outputs
• Retains chimes through an onboard speaker
• Pre-wired ASWC-1 harness (ASWC-1 sold separately)
• Designed for non-amplified models, analog amplified models,
or when bypassing a factory amplifier
• Retains balance and fade
• Micro-B USB updatable
• AX-GMCL2 interface
• AX-GMCL2 harness