Installation Instructions

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

Metra recommends MECP

certiﬁed technicians

IMPORTANT

If you are having difﬁculties with the installation of this product,

please call our Tech Support line at 1-800-253-TECH. Before doing

so, look over the instructions a second time, and make sure the

installation was performed exactly as the instructions are stated.

Please have the vehicle apart and ready to perform troubleshooting

steps before calling.

INSTALLATION INSTRUCTIONS

AX-DSP-HYKIA2

• If the Red light in the AX-DSP-HYKIA2 interface is blinking, it is not communicating to the vehicle. Remove the key from the

ignition, unplug the connectors from the interface, and then inspect all connections made. If everything is proper, connect the

harnesses back into the interface, cycle the key to ignition, then re-inspect. The Red light should be solid.

AX-DSP-HYKIA2 LAYOUT

TROUBLESHOOTING

AX-DSP

To Factory

Ampliﬁer

Connectors

Aftermarket

Ampliﬁer

AX-DSP-HYKIA2