Installation Instructions

ManualsBrandsMetra ManualsAudioMetra GM Dock n Lock Data Interface 2000-2005

AXGM-05

INSTALLATION INSTRUCTIONS

Product Info

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties • Multimeter • Small ﬂat-blade screwdriver

TABLE OF CONTENTS

Connections ............................................................2

Installation .............................................................3

Programming .........................................................3

Adjustments ...........................................................3

GM Dock n’ Lock Data Interface

2000-2005

APPLICATIONS

• Provides accessory power (12-volt 10-amp)

• Retains R.A.P. (retained accessory power)

• Provides NAV outputs (parking brake, reverse, speed sense)

• Retains chimes to the factory speaker

• Adjustable chime level

• Retains OnStar / OE Bluetooth

• Adjustable OnStar level

•

Designed for non-ampliﬁed models, or when bypassing a factory amp *

• Retains balance and fade

• AXUSB-CBL updatable (sold separately)

Buick

LeSabre 2000-2005

Oldsmobile

Aurora 2001-2003

Pontiac

Bonneville 2000-2005

• AXGM-05 interface • AXGM-05 harness

• 16-pin harness with stripped leads

* If the vehicle is ampliﬁed, either use the AXGM-09 interface, or bypass the ampliﬁer. If bypassing the

ampliﬁer, follow the “Axxess Interface Amp Bypass Schematic” online.

Summary of content (8 pages)

PAGE 1
AXGM-05 INS TAL L ATION INS TRUC TIONS GM Dock n’ Lock Data Interface 2000-2005 TABLE OF CONTENTS Connections.............................................................2 Installation..............................................................3 Programming..........................................................3 Adjustments............................................................
PAGE 2
CONNECTIONS From the 16-pin harness with stripped leads to the aftermarket radio: From the AXGM-05 harness to the aftermarket radio: • Connect the Red wire to the accessory wire. • Connect the Black wire to the ground wire. • If the aftermarket radio has an illumination wire, connect the Orange/White wire to it. • Connect the Yellow wire to the battery wire. • If the aftermarket radio has a mute wire, connect the Brown wire to it.
PAGE 3
INSTALLATION With the key in the off position: • Connect the 16-pin harness with stripped leads, and the AXGM-05 harness, into the interface. • Connect the AXGM-05 harness to the wiring harness in the vehicle. PROGRAMMING Attention! If the interface loses power for any reason, the following steps will need to be performed again. Also, if installing an ASWC-1 connect it after you initialize and test the interface/radio, with the key in the off position.
PAGE 4
AXGM-05 INS TAL L ATION INS TRUC TIONS Having difficulties? We’re here to help. Contact our Tech Support line at: 1-800-253-TECH Or via email at: techsupport@metra-autosound.com Tech Support Hours (Eastern Standard Time) Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 7:00 PM Sunday: 10:00 AM - 4:00 PM ® KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.
PAGE 5
AXGM-05 INS TRUCCIONE S DE INS TAL ACIÓN GM Dock n’ Lock Data Interfase de Datos 2000-2005 INDICE Conexiones..............................................................2 Instalación...............................................................3 Programación..........................................................3 Ajustes.....................................................................
PAGE 6
CONEXIONES Del arnés de 16 pins con conectores pelados al radio de mercado secundario: Del arnés AXGM-05 al radio de mercado secundario: • Conecte el cable rojo con el cable de accesorios. • Conecte el cable negro al cable de tierra. • Si el radio de mercado secundario tiene un cable de iluminación, conecte el cable anaranjado/blanco a ella. • Conecte el cable amarillo al cable de la batería. • Si el radio de mercado secundario tiene cable de silencio, conecte el cable marrón a ella.
PAGE 7
INSTALACIÓN Con la llave en la posición de apagado: • Conecte el arnés de 16 pins con conectores pelados, y el arnés AXGM-05, a la interfase. • Conecte el arnés AXGM-05 al arnés de cableado del vehículo. PROGRAMACIÓN Atención! Si la interfase pierde energía por cualquier razón, tendrán que volverse a ejecutar los siguientes pasos. Si va a utilizar el ASWC-1, conéctelo después de inicializar y probar el interfase/radio con la llave en la posición de apagado.
PAGE 8
AXGM-05 INS TRUCCIONE S DE INS TAL ACIÓN ¿Tienes dificultades? Estamos aquí para ayudar. Póngase en contacto con nuestra línea de soporte técnico en: 1-800-253-TECH O por correo electrónico a: techsupport@metra-autosound.