Installation Instructions

5
REV. 11/6/2018 INSTAX-HYKIA4-SWC
STEERING WHEEL CONTROL SETTINGS (CONT.)
Remapping the steering wheel control buttons
Once the AX-HYKIA4-SWC interface has been programmed, the button assignment for the
steering wheel controls may be reassigned if so desired. For example, if Seek Up is preferred to
be Mute instead. Follow the steps below to remap the steering wheel control buttons.
1. Ensure that the AX-HYKIA4-SWC interface is visible so you can see the L.E.D. flashes to
confirm button recognition.
Tip: Turning the radio off is recommended.
2. Within the first twenty seconds of turning the ignition on, press and hold the Volume Up
button on the steering wheel until the L.E.D. goes solid.
3. Release the Volume Up button, the L.E.D. will then go out. The Volume Up button has now
been programmed.
4. Follow the list in the Button Function Legend to reference the order in which the steering
wheel control buttons need to be programmed.
Note: If the next function on the list is not present on the steering wheel, press the Volume
Up button for (1) second until the L.E.D. comes on to skip that function, then release the
Volume Up button. This will tell the AX-HYKIA4-SWC interface that this function is not
available, and to move on to the next function.
5. To complete the remapping process, press and hold the Volume Up button until the L.E.D. in
the AX-HYKIA4-SWC interface goes out.
Radio legend
Continued on the next page
Radio # Radio
1 Eclipse (type 1)
2 Kenwood
3 Clarion (type 1)
4 Sony / Dual
5 JVC
6 Pioneer / Jensen
7 Alpine
8 Visteon
9 Valor
Radio # Radio
10 Clarion (type 2)
11 Metra OE
12 Eclipse (type 2)
13 LG
14 Parrot
15 XITE
16 Philips
17 TBA
18 JBL