Installation Guide

Installation instructions for part AXRC-GM1
REV. 1/21/2020 INSTAXRC-GM1
axxessinterfaces.com
metraonline.com
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Axxess Integrate
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
Connections to be made ............................................3
Installing the AXRC-GM1 ...........................................3
Initializing the AXRC-GM1 .........................................3
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake, reverse,
and speed sense)
Used in non-amplified models, or when
bypassing a factory amplifier
• Used in models without OnStar
• Retains all warning chimes
• High level speaker input
• Retains balance and fade
• Micro “B” USB updatable
FEATURES
Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
TOOLS REQUIRED
AXRC-GM1
GM Data Bus Interface
2000-2013
APPLICATIONS
AXRC-GM1 interface • AXRC-GM1 harness
INTERFACE COMPONENTS
Table of Contents
See inside front cover

Summary of content (8 pages)