Installation Instructions

AXRC-GM5

With the key in the off position:

• Connect the AXRC-GM5 harness into the interface.

• Connect the AXRC-GM5 harness to the vehicle.

Attention: If the interface loses power for any reason, the following steps

will need to be performed again.

• Turn the key (or push-to-start button) to the ignition position and wait

until the radio comes on.

Note: If the radio does not come on within 60 seconds, turn the key

to the off position, disconnect the interface, check all connections,

reconnect the interface, and then try again.

• Turn the key to the off position, and then to the accessory position.

Test all functions of the installation for proper operation, before

reassembling the dash.

Installing the AXRC-GM5 Initializing the AXRC-GM5