Installation Guide

ManualsBrandsMetra ManualsAudioMetra Chrysler 2013-Up Steering Wheel Control

AXTC-CH5

INSTALLATION INSTRUCTIONS

Product Info

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties

TABLE OF CONTENTS

Connections ............................................................2

Programming .........................................................3

Troubleshooting .....................................................4

Chrysler SWC (Steering Wheel Control)

and Data Interface 2013-up

APPLICATIONS

• Provides accessory power

(10-amp)

• Provides wires for multimedia

radios (park brake, reverse,

speed sense)

• Retains audio controls on the

steering wheel

• Designed to be compatible with

all major radio brands

• Auto detects vehicle type, radio

connection, and preset controls

• Ability to dual assign steering

wheel control buttons

• Retains memory settings even

after battery disconnection or

interface removal (non volatile

memory)

• Provides illumination output

•

Retains the factory backup camera

• Retains the 3.5mm AUX-IN jack

• Micro-B USB updatable

* Small screen, Base radio

Chrysler

200 LX 2015-2016

Dodge

Dart* 2013-2016

Jeep

Cherokee Sport 2014-2016

Compass Sport 2017.5-2018

Ram

1500 Classic* 2019

1500/2500/3500* 2013-2017

Chassis Cab 3500/4500/5500* 2013-2017

• AXTC-CH5 interface

• AXTC-CH5 harness

• 3.5mm adapter

Summary of content (4 pages)

PAGE 1
AXTC-CH5 INS TAL L ATION INS TRUC TIONS Chrysler SWC (Steering Wheel Control) and Data Interface 2013-up INTERFACE FEATURES • Provides accessory power (10-amp) • Provides wires for multimedia radios (park brake, reverse, speed sense) • Retains audio controls on the steering wheel • Designed to be compatible with all major radio brands • Auto detects vehicle type, radio connection, and preset controls APPLICATIONS Chrysler 200 LX Dodge Dart* * Small screen, Base radio AxxessInterfaces.
PAGE 2
CONNECTIONS Reset Button To vehicle connector LED Light Aftermarket Radio (radio’s features may vary) Front Rear View Rear AUX-IN SWC Sub 3.
PAGE 3
PROGRAMMING 1. Open the driver’s door, and keep open during the programming process. 6. Green & Red LED 2. OFF Cycle the ignition on. Green LED RT STA ON ACC The LED light will go out, then once again quickly flash Green & Red while the interface programs itself to the vehicle. Once programmed, the LED light will go out again, then turn solid Green. 7. OFF 4. Locate the Volume Up button behind the steering wheel on the right hand side.
PAGE 4
AXTC-CH5 INS TAL L ATION INS TRUC TIONS Having difficulties? We’re here to help. Contact our Tech Support line at: TROUBLESHOOTING 1. If the interface fails to function, press and release the reset button, then repeat the programming process from step 4 to try again. LED Light 2. Reset Button At the end of programming the LED light will turn Solid Green which indicates programming was successful.