Installation Instructions

ManualsBrandsMetra ManualsAudioMetra Toyota 2018-Up Amp Interface

A XTO -T Y3

INSTALLATION INSTRUCTIONS

Product Info

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties • Small ﬂat-blade screwdriver

TABLE OF CONTENTS

Connections ............................................................2

Installation .............................................................3

Programming .........................................................3

Audio Level Adjustment ........................................3

Toyota Ampliﬁer Interface

2018-Up

• Provides NAV outputs (parking

brake, reverse, speed sense)

• Pre-wired AXSWC harness

(AXSWC sold separately)

• Retains the factory AUX-IN jack

• Retains the factory backup

camera

• Includes an AXCSD-6V 12-to-6V

step-down for the factory

camera

• Designed for ampliﬁed models

• Retains balance and fade

• Micro-B USB updatable

• AXTO-TY3 interface • AXTO-TY3 harness

• 16-pin harness with stripped leads

• AXCSD-6V • Backup camera harness

APPLICATIONS

Toyota

Avalon 2019-Up

Camry 2018-Up

RAV4 2019-Up

Sienna 2018-Up

Summary of content (4 pages)

PAGE 1
AXTO-TY3 I N S TA L L AT I O N I N S T R U C T I O N S Toyota Amplifier Interface 2018-Up INTERFACE FEATURES • Provides NAV outputs (parking brake, reverse, speed sense) • Pre-wired AXSWC harness (AXSWC sold separately) • Retains the factory AUX-IN jack • Retains the factory backup camera • Includes an AXCSD-6V 12-to-6V step-down for the factory camera • Designed for amplified models • Retains balance and fade • Micro-B USB updatable INTERFACE COMPONENTS • AXTO-TY3 interface • AXTO-TY3 harness • 16-pin
PAGE 2
CONNECTIONS From the 16-pin harness with stripped leads to the aftermarket radio: • Connect the Blue/White wire to the amplifier turn on wire. This wire must be connected to hear sound from the factory amplifier. • Connect the Gray wire to the right front positive speaker output. • Connect the Gray/Black wire to the right front negative speaker output. • Connect the White wire to the left front positive speaker output. • Connect the White/Black wire to the left front negative speaker output.
PAGE 3
INSTALLATION With the key in the off position: 1. Connect the 16-pin harness with stripped leads, and the AXTO-TY3 harness, into the AXTO-TY3 interface. 2. Connect the backup camera harness, and the AXTO-TY3 harness, to the wiring harness in the vehicle. AUDIO LEVEL ADJUSTMENT 1. With the vehicle and radio turned on, turn the volume up 3/4 of the way. 2. With a small flat-blade screwdriver, adjust the potentiometer clockwise to raise the audio level; counterclockwise to lower the audio level. 3.
PAGE 4
AXTO-TY3 I N S TA L L AT I O N I N S T R U C T I O N S Having difficulties? We’re here to help. Contact our Tech Support line at: 386-257-1187 Or via email at: techsupport@metra-autosound.com Tech Support Hours (Eastern Standard Time) Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 7:00 PM Sunday: 10:00 AM - 4:00 PM ® KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.