Installation Instructions

AXTRIG AXTRIG
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
AXTRIG AXTRIG
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
REV. 12/31/19 REV. 12/31/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com Integrate • AxxessInterfaces.com
REV. 12/31/19 REV. 12/31/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com Integrate • AxxessInterfaces.com
INTRODUCTION
The AXTRIG emulates a parking brake signal for use in RV’s, off road vehicles,
and exhibition vehicles.
INTRODUCTION
The AXTRIG emulates a parking brake signal for use in RV’s, off road vehicles,
and exhibition vehicles.
INTRODUCTION
The AXTRIG emulates a parking brake signal for use in RV’s, off road vehicles,
and exhibition vehicles.
INTRODUCTION
The AXTRIG emulates a parking brake signal for use in RV’s, off road vehicles,
and exhibition vehicles.
CAUTION! All accessories, switches, climate controls panels, and especially air bag
indicator lights must be connected before cycling the ignition. Also, do not remove
the factory radio with the key in the on position, or while the vehicle is running.
CAUTION! All accessories, switches, climate controls panels, and especially air bag
indicator lights must be connected before cycling the ignition. Also, do not remove
the factory radio with the key in the on position, or while the vehicle is running.
CAUTION! All accessories, switches, climate controls panels, and especially air bag
indicator lights must be connected before cycling the ignition. Also, do not remove
the factory radio with the key in the on position, or while the vehicle is running.
CAUTION! All accessories, switches, climate controls panels, and especially air bag
indicator lights must be connected before cycling the ignition. Also, do not remove
the factory radio with the key in the on position, or while the vehicle is running.
Connections to be made
Wiring the AXTRIG:
1. Connect the Black wire to chassis ground.
2.
Connect the Blue wire to the aftermarket radios amplifier turn-on wire .
3. Connect the Green wire to the parking brake wire of the aftermarket radio.
4. Connect the Yellow wire to the foot brake wire of the aftermarket radio
(Alpine only).
Attention! This product is meant to be used in RV’s, off road vehicles, and exhibition
vehicles only. Other applications are illegal.
Connections to be made
Wiring the AXTRIG:
1. Connect the Black wire to chassis ground.
2.
Connect the Blue wire to the aftermarket radios amplifier turn-on wire .
3. Connect the Green wire to the parking brake wire of the aftermarket radio.
4. Connect the Yellow wire to the foot brake wire of the aftermarket radio
(Alpine only).
Attention! This product is meant to be used in RV’s, off road vehicles, and exhibition
vehicles only. Other applications are illegal.
Connections to be made
Wiring the AXTRIG:
1. Connect the Black wire to chassis ground.
2.
Connect the Blue wire to the aftermarket radios amplifier turn-on wire .
3. Connect the Green wire to the parking brake wire of the aftermarket radio.
4. Connect the Yellow wire to the foot brake wire of the aftermarket radio
(Alpine only).
Attention! This product is meant to be used in RV’s, off road vehicles, and exhibition
vehicles only. Other applications are illegal.
Connections to be made
Wiring the AXTRIG:
1. Connect the Black wire to chassis ground.
2.
Connect the Blue wire to the aftermarket radios amplifier turn-on wire .
3. Connect the Green wire to the parking brake wire of the aftermarket radio.
4. Connect the Yellow wire to the foot brake wire of the aftermarket radio
(Alpine only).
Attention! This product is meant to be used in RV’s, off road vehicles, and exhibition
vehicles only. Other applications are illegal.
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians