Installation Instructions

ManualsBrandsMetra ManualsAudioMetra Chevy Corvette 1997-2004 Data Interface

AXVI-2004

INSTALLATION INSTRUCTIONS

Product Info

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties

TABLE OF CONTENTS

Connections ............................................................2

Installation .............................................................2

Programming .........................................................3

Adjustments ...........................................................3

Chevrolet Corvette Data Interface

1997-2004

• Provides accessory power (12-volt 10-amp)

• Retains R.A.P. (retained accessory power)

• High level speaker input

• Retains ampliﬁed door woofers

• Micro-B USB updatable

• AXVI-2004 interface • AXVI-2004 harness package* • Differential converter

* Consists of (2) harnesses

Summary of content (4 pages)

PAGE 1
AXVI-2004 INS TAL L ATION INS TRUC TIONS Chevrolet Corvette Data Interface 1997-2004 INTERFACE FEATURES • Provides accessory power (12-volt 10-amp) • Retains R.A.P. (retained accessory power) • High level speaker input • Retains amplified door woofers • Micro-B USB updatable TABLE OF CONTENTS Connections.............................................................2 Installation..............................................................2 Programming......................................................
PAGE 2
CONNECTIONS From the AXVI-2004 harness to the aftermarket radio: INSTALLATION • Connect the Black wire to the ground wire. Attention! There are two identical 12-pin harnesses from the AXVI-2004 harness, one with power wires, and one with speaker wires. • Connect the Yellow wire to the battery wire. Differential converter: AXVI-2004 interface: • Connect the Red wires (qty. 2) to the accessory wire. 1. Connect the 12-pin speaker harness from the AXVI-2004 harness into the differential converter. 3.
PAGE 3
PROGRAMMING ADJUSTMENTS Attention! If the interface loses power for any reason, the following steps will need to be performed again. Audio Level Adjustment 1. Cycle the key on and wait until the radio comes on. 2. With a small flat-blade screwdriver, adjust the (4) potentiometers clockwise to raise the audio level; counterclockwise to lower. Note: If the radio doesn’t come on within 60 seconds, cycle the key off then unplug the interface.
PAGE 4
AXVI-2004 INS TAL L ATION INS TRUC TIONS Having difficulties? We’re here to help. Contact our Tech Support line at: 386-257-1187 Or via email at: techsupport@metra-autosound.com Tech Support Hours (Eastern Standard Time) Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 7:00 PM Sunday: 10:00 AM - 4:00 PM ® KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.