Installation Instructions

CONNECTIONS

I N STALL ATI O N

From the AXVI-2004 harness to the aftermarket radio:

• Connect the Black wire to the ground wire.

• Connect the Yellow wire to the battery wire.

• Connect the Red wires (qty. 2) to the accessory wire.

• Connect the Blue/White wire to the amp turn on wire.

• Connect the Orange wire to the illumination wire (If applicable)

• Connect the Gray wire to the front right positive speaker output.

• Connect the Gray/Black wire to the front right negative speaker output.

• Connect the White wire to the front left positive speaker output.

• Connect the White/Black wire to the front left negative speaker output.

• Connect the Purple wire to the rear right positive speaker output.

• Connect the Purple/Black wire to the rear right negative speaker output.

• Connect the Green wire to the rear left positive speaker output.

• Connect the Green/Black wire to the rear left negative speaker output.

Differential converter:

1. Connect the 12-pin speaker harness

from the AXVI-2004 harness into the

differential converter.

2. Connect the 8-pin harness from the

AXVI-2004 harness package into the

differential converter, and then to the

wiring harness in the vehicle.

AXVI-2004 interface:

3. Connect the 12-pin power harness from

the AXVI-2004 harness into the

AXVI-2004 interface.

4. Connect the AXVI-2004 harness to the

wiring harness in the vehicle.

Attention! There are two identical 12-pin harnesses from the AXVI-2004 harness, one with power

wires, and one with speaker wires.

Reset

LED

OUTPUT

INPUT

I N T E G R A T E

LD-AX-XSVI-GM5

TO XSVI

XSVI-2004 INTERFACE

RADIO CONNECTIONS

DIFFERENTIAL CONVERTER

VEHICLE CONNECTORS