Installation Instructions

REV. 1/22/2020 INSTAXVI-2004

Audio Level Adjustment

1. Turn the volume of the radio up 3/4 of the way.

2. With a small ﬂat-blade screwdriver, adjust the (4) potentiometers clockwise to raise the

audio level; counterclockwise to lower.

3. Once at a desired level, audio level adjustment is complete.

PROGRAMMING ADJUSTMENTS

1. Cycle the key on and wait until the radio comes on.

Note: If the radio doesn’t come on within 60 seconds, cycle the key off then unplug the

interface. Check all connections, reconnect the interface, and then try again.

2. Cycle the key off. If the driver’s door is closed, open and close the door. Cycle the key back on.

3. Test all functions of the installation for proper operation, before reassembling the dash.

Note: The LED in the differential convertor is inoperable.

Attention! If the interface loses power for any reason, the following steps will need to be

performed again.