MD7ra».
Introduction The CS-4X1MVU is a high performance HDMI"' 4Xl Quad Multi-Viewer with seamless Switcher. It supports four HDMI™ input sources to be displayed on one screen with four multi-view modes. As a switcher, it can also seamlessly switch the four HDMI"' input freely. The product can be controlled by the front panel buttons or the IR remote control. Features e Compliant with HDCP 1.
What's included Ports and Interfaces Remot e Control 1. POWER: Power standby/power on 2. MUTE: Audio output mute on/off 3. Full Screen MODE 2; Press 1 ~4 button will select the corresponding channel and displayed in full screen as a seamless switcher. 4. AUDIO SWITCH: press 1 ~4 button will select the corresponding audio output.(In 2x2, 1x3 and P1P Modesl Main Unit Remote Control Size: 2 x 4.8 x .37 inches S. MODE 1. The four HDMI input sources are displayed ,n 2x2 on one screen. EB) a.
7. INPUT 1-4: HDMI Inputs 1-4 15. SERVICE: Firmware Update port for factory use only 8, OUTPUT: HDMI Output 16. M ode 1: Cycle through 2x2, lxl, and PiP view modes 9. STEREO: Stereo Audio Output 17. M ode 2: Cycle through 1~4 Seamless Switch mode 10. DC/12V: DC 12V IN 18. M ode 3: Cycle through l x3 view mode 11. ON/OFF: Power on/off switch 19. Audio: Audio channel output select button 12, Power: Power LED Indicator 20.
Press [ EB ]+ [ 0 ] (modify key)+ Seamless Switch 1, then the layout will be: INl IN2 IN3 IN4 Press [ EB ]+ [ 0 ] (modify key)+ Seamless Switch 2, then the layout will be: IN2 INl IN4 IN3 Press [ EB ]+ [ 0 ] (modify key)+ Seamless Switch 3, then the layout will be: IN3 IN4 INl IN2 Press [ EB ]+ [ 0 ] (modify key)+ Seamless Switch 3, then the layout will be: IN4 IN3 IN2 INl For lxl [ [I] ] left /right mode, press this key once and it will display the below layout mode: INl IN2 Pres
Press [ OJ ]+ [ 0 ] (modify key)+ Seamless Switch 1+ Seamless Switch 2 or 3 or 4, then the layout will be: IN2 INl INl IN3 or Press [ OJ ]+ [ 0 IN4 or ] (modify key) + Seamless Switch 2+ Seamless Switch 1 or 3 or 4, then the layout will be: INl IN2 INl IN2 IN3 or IN2 IN4 or Press [ OJ ]+ [ 0] (modify key)+ Seamless Switch 3+ Seamless Switch 1 or 2 or 4, then the layout will be: IN3 INl IN3 IN2 or Press [ OJ ]+ [ 0 IN4 IN3 IN4 or ](modify key)+ Seamless Switch 4+ Seamless Switch 1
I Press [ DJ twice+ [ 01 (modify key) + Seamless Switch 1 and Seamless Switch 2 or 3 or 4, then the layout will be: INl INl IN2 IN3 or Press IN2 INl [DJ ] twice+ [ 01 IN4 or (modify key)+ Seamless Switch 3 and Seamless Switch 1 or 2 or 4, then the layout will be: IN3 IN3 INl IN3 IN2 or [DJ] twice+ [ 0] IN4 or (modify key) + Seamless Switch 4 and Seamless Switch 1 or 2 or 3, then the layout will be: IN4 IN4 INl For lx3 IN2 IN3 or Press IN4 or [DJ ] twice+ [ 0 ] (modify key)+ Seam
Press [ [ ] j + [ 0 j (modify key)+ Seamless Switch 1, the output layout will be: IN2 INl IN3 IN4 Press [ [ ] ] + [ 0 j (modify key)+ Seamless Switch 2, t he output layout will be: INl IN2 IN3 IN4 Press [ [ ] ] + [ 0 ] (modify key)+ Seamless Switch 3, the output layout will be: INl IN3 IN2 IN4 Press [ [ ] ] + [ 0] (modify key)+ Seamless Switch 4, the output layout will be: INl IN4 IN2 IN3 For PIP mode, press [ Q ] and it will be displayed with the below layout: INl I IN2 Press PiP [ Q ]+[ 0
Press [GI ]+[ 0 ] (modify key) +Seamless Switch 1 + number 2 or 3 or 4, the output layout will be: IN1 INl I IN2 INl I IN3 or I IN4 or Press [GI ]+[ 0] (modify key) +Seamless Switch 2 + number 1 or 3 or 4, the output layout will be: IN2 IN2 I INl '--------''-----' Press IN2 I IN3 or I IN4 or IGI )+I 0] (modify key) + Seamless Switch 3 + number 1 or 2 or 4, the output layout will be: IN3 IN3 I IN1 ~---~~-~ IN3 I IN2 or I IN4 or I 0 ] (modify key) +Seamless Switch 4 + number 1 or
Connection Diagram i i i i Adapter HDTV Btu-ray DVD PS3 ••~--i•• HDMI Cable PC _ _,___ 3.
Specification --- Input Ports HDMI x4 Output Ports HDMI x 1, Stereo x 1 Vertical Frequency Range 50/G0Hz Video Bandwidth 3.
Troubleshooting Problems Causes Solutions Power light is off and product is not Is the power adapter properly working; Signal light is off and no connected and the power on/off button connected properly and turn on the video output, black screen.