Owner's Manual
Analog
to
Digital
Audio
Converter
(CS-ATD)
6.0 CONNECTION
AND
OPERATION
Amphfler
HOOVO
Before installation, please make sure all devices you wish to connect have
been turned off.
1) Connect the audio source device
to
the CS-ATD using appropriate R/L
cable.
2)
Connect the
AN
Receivers
or
Amplifiers to the CS-ATD using appropriate
Toslink or Coaxial cables.
3)
Insert the DC side
of
the
5v
power supply into the CS-ATD and then connect
the
AC
side
of
the power supply into the wall outlet.
Attention
:
Insert
/
Extract
cable
gently
.
WARNING
1. Do not expose the CS-ATD to rain, moisture, and no objects filled with
liquids, such as vases, shall be placed on the CS-ATD.
2. Do not install near any heat sources such as radiators, heat registers,
Stoves
or
other apparatus (including amplifiers) that product heat.
3. Do not place sources with flames, such as lighted candles, on the unit.
4. Clean this apparatus only with dry cloth.
5. Only use attachments/accessories specified by the manufacturer.
6. Refer all servicing to qualified service personnel.
Me7ra~-
HOME
THEATER
GROUP
1-866-839-9187 • MetraHomeTbeattt.com