Installation instructions

ManualsBrandsMetra ManualsMobile PhonesDash kit

METRA. THE WORLD’S BEST KITS.™

APPLICATIONS

1-800-221-0932

metraonline.com

INSTALLATION INSTRUCTIONS FOR PART 99-7879

2011 Honda CR-Z

99-7879

•RecessedDINmountradioprovisionwithpocket

•ISOradiomountprovisionwithpocket

WIRING & ANTENNA CONNECTIONS(SoldSeparately)

Wireharness:70-1729

Antennaadapter:40-HD10

PanelRemovalTool(ATHKNGL)•PhillipsScrewdriver

D E

•A)RadioHousing•B)ISOBrackets•C)Pocket

•D)(11)#8X3/8”PhillipsTrussHeadscrews

•E)(2)#6X3/8”PhillipsPanHeadscrews

•F)(4)Whiteplasticclips•G)(1)Metalclip

TOOLS REQUIRED

KIT FEATURES

KIT COMPONENTS

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-7879 APPLICATIONS 2011 Honda CR-Z 99-7879 KIT FEATURES • Recessed DIN mount radio provision with pocket • ISO radio mount provision with pocket KIT COMPONENTS • A) Radio Housing • B) ISO Brackets • C) Pocket • D) (11) #8X3/8” Phillips Truss Head screws • E) (2) #6X3/8” Phillips Pan Head screws • F) (4) White plastic clips • G) (1) Metal clip A D B C E F G WIRING & ANTENNA CONNECTIONS (Sold Separately) Wire harness: 70-1729 Antenna adapter: 40-HD10 TOOLS REQUI
PAGE 2
99-7879 Table of Contents Dash Disassembly – Honda CR-Z 2011 3 Kit Assembly – ISO mount radio provision with pocket Caution 4-5 Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition. *NOTE: Refer Also to the instructions included with the aftermarket radio.
PAGE 3
99-7879 Dash Disassembly 1. Unclip and remove the lower dash panel cover above the pocket and remove the 8mm/Phillips screw. (Figures A and B) 2. Unclip and remove the radio from the dash. (Tip: start at the top of the radio) (Figure C) 3. Unplug and remove the radio.
PAGE 4
99-7879 Kit Assembly 1. Remove the center top clip off of the factory radio and install onto the 99-7879 install kit. 3. Remove 2 phillips screws holding the factory hazard switch for the factory panel and install into the 99-7879 re-using the factory hardware. 2. Follow the diagram to attach the necessary clips to the radio housing in the proper locations. 4. Remove 2 phillips screws holding the passenger airbag light from the factory panel and install into the 99-7879 using the supplied #6 screws.
PAGE 5
99-7879 ISO mount radio provision with pocket 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2. Align the holes in the radio housing brackets with the holes in the ISO DIN Head Unit and secure the brackets to the head unit with the screws included with the unit. (Figure B) (Figure B) 3.
PAGE 6
Notes
PAGE 7
Notes
PAGE 8
REV. 5/05/11 INSTALLATION INSTRUCTIONS FOR PART 99-7879 METRA. THE WORLD’S BEST KITS.™ metraonline.