Installation instructions

ManualsBrandsMetra ManualsMobile PhonesDash kit

METRA. THE WORLD’S BEST KITS.™

APPLICATIONS

1-800-221-0932

metraonline.com

INSTALLATION INSTRUCTIONS FOR PART 99-7880B

WIRING & ANTENNA CONNECTIONS (Sold Separately)

Wiring Harness:

• 70-1729 - Honda harness 2008-up

• 70-1730 - Honda Premium Audio Integration harness 2008-up

Antenna Adapter:

• 40-HD11 - Honda antenna adapter 2009-up

Panel Removal Tool • Phillips Screwdriver • Socket Wrench

TOOLS REQUIRED

Honda Odyssey 2011-up

99-7880B

B CA

• A) Radio Housing Trim Panel • B) Storage Pocket • C) (4) #8 x 3/8” Phillips screws

KIT FEATURES

KIT COMPONENTS

• ISO DIN head unit provision with pocket

• DDIN head unit provisions

• Painted matte black to match factory finish

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-7880B APPLICATIONS Honda Odyssey 2011-up 99-7880B KIT FEATURES • ISO DIN head unit provision with pocket • DDIN head unit provisions • Painted matte black to match factory finish KIT COMPONENTS • A) Radio Housing Trim Panel • B) Storage Pocket • C) (4) #8 x 3/8” Phillips screws A B C WIRING & ANTENNA CONNECTIONS (Sold Separately) Wiring Harness: • 70-1729 - Honda harness 2008-up • 70-1730 - Honda Premium Audio Integration harness 2008-up Antenna Adapter: • 40-HD1
PAGE 2
99-7880B Table of Contents Dash Disassembly – Honda Odyssey 2011-up 3-4 Kit Assembly – ISO DIN head unit provisions – Double DIN head unit provisions 5 6 Caution Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition. *NOTE: Refer also to the instructions included with the aftermarket radio.
PAGE 3
99-7880B Dash Disassembly 1. Unsnap and remove trim around the shifter. (Figure A) 2. Unsnap and remove the passenger side trim panel above the glove box. (Figure B) 3. Unsnap and remove the climate control panel from the controls over to the passenger side.
PAGE 4
99-7880B Dash Disassembly 4. Remove four Phillips screws from the upper part of the lower center console and pull back the upper part enough to remove the radio. (Figure D) 5. Remove four screws and remove the radio. Remove the factory brackets for use in kit assembly. (Figure E) 6. Remove two screws and remove the factory pocket from the top of the radio. (Figure F) 7. Attach the factory pocket to the Metra radio housing trim panel using the factory hardware.
PAGE 5
Kit Assembly 99-7880B ISO DIN head unit provisions 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2. Mount the factory radio brackets to the head unit with the screws supplied with the unit. (Figure A) 3. Mount the Metra pocket to the brackets using the supplied screws. (Figure A) (Figure A) 4.
PAGE 6
Kit Assembly 99-7880B Double DIN head unit provisions 1. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2 Mount the factory radio brackets to the new head unit with the screws supplied with the unit. (Figure A) 3. Mount the radio assembly into the dash and snap the radio housing panel over the radio asembly. (Figure B) (Figure A) 4.
PAGE 7
Notes
PAGE 8
REV. 8/15/11 INSTALLATION INSTRUCTIONS FOR PART 99-7880B METRA. THE WORLD’S BEST KITS.™ metraonline.