Installation Guide

ManualsBrandsMetra ManualsAudio accessories & installationDash Kit

Metra. The World’s Best Kits.



INSTALLATION INSTRUCTIONS

DP-3002

Attention! Let the vehicle sit with the key

out of the ignition for a few minutes before

removing the factory radio. When testing the

aftermarket equipment, ensure that all factory

equipment is connected before cycling the

key to ignition.

KIT FEATURES

• ISO DDIN radio provision

• Two OEM matched textures

• Available in multiple colors:

• DP-3002GY - Gray

• DP-3002PWT - Pewter

• DP-3002SHL - Shale

• DP-3002TB - Textured Black

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) Panel clips (11)

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Assembly ..........................................................3

WIRING & ANTENNA CONNECTIONS

(sold separately)

Wiring harness: 70-1858

(models without a factory amp)

70-1859 (models with a factory amp)

Antenna Adapter: 40-GM10

A B C

GM Full-size trucks and SUV’s 1999-2002

Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle

speciﬁc applications

(Models with message center in the factory instrument cluster)

CHEVROLET

Avalanche 2002-2002

Silverado 1500 1999-2002

Silverado 2500 1999-2002

Silverado 3500 2001-2002

Silverado 3500

(commercial) 2002-2002

Suburban 2000-2002

Tahoe 2000-2002

GMC

Sierra 1500 1999-2002

Sierra 2500 2000-2002

Sierra 3500 2001-2002

Yukon/Yukon XL

(less Denali 01-02) 2000-2002

APPLICATIONS

Summary of content (8 pages)

PAGE 1
DP-3002 I N S TA L L AT I O N I N S T R U C T I O N S GM Full-size trucks and SUV’s 1999-2002 (Models with message center in the factory instrument cluster) Visit MetraOnline.
PAGE 2
DASH DISASSEMBLY 1. Unsnap and remove the factory dash panel. (Figure A) 2. Depress the tabs securing the factory radio and remove. 3. Cut and remove the radio rear support shelf from the dash cavity. Continue to Kit Assembly (Figure A) 2 1.800.221.0932 | MetraOnline.
PAGE 3
KIT ASSEMBLY 1. Install the (11) included panel clips to the radio trim panel. The factory panel clips may be used if desired. 2. Attach the radio brackets to the radio and secure using the screws supplied with the radio and slide into dash opening. (Figure A) 3. Snap the radio trim panel over the radio until it clicks in. 4. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Test the radio for proper operation. 5.
PAGE 4
DP-3002 I N S TA L L AT I O N I N S T R U C T I O N S Having difficulties? We’re here to help. Contact our Tech Support line at: 386-257-1187 Or via email at: techsupport@metra-autosound.com Tech Support Hours (Eastern Standard Time) Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 7:00 PM Sunday: 10:00 AM - 4:00 PM ® KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.
PAGE 5
DP-3002 I N S T R U C C I O N E S D E I N S TA L AC I Ó N GMC Camiones y SUV de tamaño completo 1999-2002 (modelos con centro de mensajes en el conjunto de instrumentos de fábrica) Visite MetraOnline.com para obtener información más detallada sobre el producto y aplicaciones actualizadas específicas para vehículos.
PAGE 6
DESMONTAJE DEL TABLERO 1. Suelte a presión y quite el panel del tablero de fábrica. (Figura A) 2. Presione las pestañas que sostienen el radio de fábrica y quítelo. 3. Corte y quite la repisa de soporte posterior del radio de la cavidad del tablero. Continúe con el Ensamble del Kit (Figura A) 2 1.800.221.0932 | MetraOnline.
PAGE 7
ENSAMBLE DEL KIT 1. Instalar el (11) incluyó los ganchos del panel al panel de ajuste de radio. Los clips del panel de la fábrica pueden usarse si se desea. 2. Fije los soportes de radio para la radio y asegure con los tornillos suministrados con la radio y deslice en la abertura tablero. (Figura A) 3. inserte a presión el panel de la moldura del radio sobre el radio hasta que haga clic. 4.
PAGE 8
DP-3002 I N S T R U C C I O N E S D E I N S TA L AC I Ó N Si tiene dificultades con la instalación de este producto, comuníquese con nuestra línea de soporte técnico, ya sea por teléfono al 1-800-253-TECH, o envíe un correo electrónico a techsupport@metraautosound.com. Antes de hacerlo, revise el folleto de instrucciones por segunda vez y asegúrese de que la instalación se realizó exactamente como se indica en el manual de instrucciones.