Owner's Manual
DP-3021B
Dash Disassembly
3
(Figure D) (Figure F)(Figure E)
6.  Unclip the small grille to the left 
of the ignition switch, and then 
remove the (1) 9/32” screw 
exposed. (Figure D)
7.  Unclip the radio dash panel starting 
from the base of the center 
console, unplug the cigarette 
lighter, and then unclip and remove 
the entire panel. (Figure E)
8.  Remove the (2) 9/32” screws 
securing the radio, and then 
unplug and remove.
Convertibles only:
Remove the (2) T-15 Torx screws from 
the top and the (2) T-15 Torx screws 
from the lower sides securing the 
center seat divider. Lift the seat divider 
straight up to remove it. (Figure F)
Continue to Kit Preparation






