Owner's Manual

ISO ODIN radio provision
1. Attach the radio brackets to the radio
using the screws supplied with the
radio. ( Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio . Metra recommends using the
proper mating adapter from Metra
and/or AXXESS.
3. Slide the radio into the sub dash and
secure it using the factory hardware.
4. Reassemble the dash in reverse order of
disassembly using the new 7528 radio
housing.
El Melrai&
KIT ASSEMBLY
(Figure A)
386.257.1187 , MetraOnline.com