Owner's Manual

Revision 09/15/94

120 E4901

Receiver Wiring Adaptor

Isolate and individually

tape off the ends of any

unused wires to prevent

electrical short circuit.

How to connect wires:

• Strip wire ends back 1/2"

• Twist together

• Solder

• Tape

Tools required:

soldering iron

solder

(Rosin Core sugg.)

electrical tape

Blue - Connect to blue lead on 120 70-7900/7901

Black - attach to a solid ground

Blue- - Power antenna

Note: This is required if factory installed power antenna is retained.

Connect blue wire to power

antenna wire of new receiver.

PAGE 1
B 120 E4901 Receiver Wiring Adaptor Revision 09/15/94 Note: This is required if factory installed power antenna is retained. Black - attach to a solid ground Blue- - Power antenna Blue - Connect to blue lead on 120 70-7900/7901 Connect blue wire to power antenna wire of new receiver. How to connect wires: • Strip wire ends back 1/2" • Twist together • Solder • Tape Tools required: soldering iron Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.