Installation Instructions

• Turn the key (or push-to-start button) to the ignition position and wait until the radio comes on.

Note:

If the radio doesn’t come on within 60 seconds, turn the key to the off position,

disconnect the interface, check all connections, reconnect the interface, and then try again.

• Turn the key to the off position, and then to the accessory position. Test all functions of the

installation for proper operation, before reassembling the dash.

1. Connect the HDCC-02 harness to the HDCC-02 interface, and then to the wiring harness

in the vehicle.

INSTALL ATION PROGRAMMING