Installation Instructions

REV. 9/16/2019 INSTHDCC-02

EXTRA SETTINGS

LaneWatch settings:

Note: The LaneWatch button is located on the left side of the steering wheel, on the stalk.

• Press and hold the LaneWatch button for 15 seconds to toggle right turn signal triggering

on or off. If on, press and hold the button again for 15 seconds to toggle it off. Likewise if off.

The hi-beam indicator will ﬂash 1 time if off; 2 times if on.

Note: Right turn signal triggering is default on.

CAUTION! The following step should only be performed by an authorized Honda technician. Once

this procedure has been started, you cannot back out of it.

• Press and hold the LaneWatch button for 50 seconds to begin the LaneWatch aiming

procedure. The hi-beam indicator will ﬂash 3 times. At this point the display will also

show an image of the LaneWatch camera feed, with instructions on what to do--a Honda

authorized technician will know what to do from here.

Note: While accessing LaneWatch aiming the right turn signal triggering will be toggled

after 15 seconds has passed, so the hi-beam indicator will ﬂash before the 50 second mark is

reached. The technician will have to ignore that and continue holding the button until the 50

second mark is reached to aim the camera.

Clock and date settings:

Note: This section refers to the buttons on the left side of the steering wheel.

Note: If no button is pressed for 15 seconds, this process will end.

• Activate the analog clock on the top screen.

• Press and hold the “Source” button for 15 seconds until the hi-beam indicator blinks twice,

and then let go.

• Press and release the “Seek-Up” and “Seek-Down” buttons to toggle between minutes,

hours, days, months, and year.

• Once a choice is selected, press and release the “Volume-Up” or “Volume-Down” buttons to

adjust the settings.

•

While changing the hour, press the “Source” button to toggle between 12 and 24 hour formats

• Wait 15 seconds for the process to end.