RGB Chasing Setup Guide

Heise Application Setup
SINGLE product configuration
MetraOnline.com
Date: 4/15/2022
One controller and One lighting product
1) Look up the chasing product being controlled by this
controller in the Pixel count chart, and find the
corresponding pixel count value.
2) Set the “Pixel” count to the value found in the
previous step.
3) Click the green “Setting” button to save
4) Click the back “<“ in the top left corner to return to
the main app.
5) Power cycle the controller, by turning off the power
source, then back on again.
6) Test functionality
Example used: HE-CHASE-W17