Instruction Manual HDMI® Hybrid Active Optical Cable 1
Install Bay HDMI Hybrid AOC cable INTRODUCTION Thank you for purchasing the Install Bay Fiber Optic HDMI AOC Cable. This Cable allows you to transmit HDMI signals to a distance of up to 100m without external power supply. This cable is a hybrid cable containing both fiber optic and copper cores. Our HDMI Active Hybrid Cable is the most competitive long distance HDMI interconnection solution on the market.
The minimum bending radius of the hybrid cable is approximately 45mm, bending the cable to a smaller radius will irreversibly destroy the cable. Pay attention to trip hazards; make sure that the cable is installed safely. Do not leave packaging material lying around carelessly. These may become dangerous playing material for children. Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture, flammable gases, vapors and solvents.
•Long-term bending radius (45mm) •Plug and Play •Low Power Consumption: 250mW (max) •No loss of signal •Delivering crystal clear digital images instantly •IB-HDAOC Series UL rated CL3 approved PVC jacket •IB-HDAOCP Series UL rated Plenum approved PVC jacket APPLICATION This product is for example applicable to: •Digital Signage •LED Signboards •Home Theater •Blu-ray, 3D Video, Projector, Set-top box, DVR, Game Consoles and Computer •TV Broadcast Station •Conference Room •Video Equipment •Security Systems a
Environmental Conditions Operating Temperature Storage Temperature Relative Humidity -10-50 °C / 14 – 122 °F -20-60 °C / -4 – 140 °F 10-80 %RH Mechanical properties and Environmental performance Item Units Specified values Tensile strength (Long-term) N Up to150 Crush resistance (Long-term) N/100mm 300 Minimum bending radius (dynamic) mm 20D* Minimum bending radius (static) mm 10D* *D = the diameter of the cable body, in this case it is 4.
Install Bay AOC HDMI Cable are shut down and without power. Then you can start to connect the “source side” of the HDMI plug to the transmitter and connect the “display side” of the other HDMI plug to the receiver/display. This works without additional power supply. We do not recommend using any intermediate cables or adapters between the connections, as the signal transmission performance maybe attenuated. Switch on the power of the device of the HDMI source and the display.
MAINTENANCE There are no components located inside the product you need to maintain. Never open/dismantle the product. Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified shop. If you have questions which remain unanswered by these operating instructions, contact our technical support service or other technical personnel. CLEANING Before cleaning the product it must be disconnected from all other connected products.
CE CONFORMITY hereby declares that the Install Bay HDMI AOC complies with Directive 2014/30/EU. DISPOSAL OF THE DEVICE WEEE-Reg. No.: DE 93847290 According to the European WEEE directive, any electrical and electronic equipment must not be disposed with consumers waste. As a consumer, you are committed by law to reposit electrical and electronic devices to public collecting points or to the dealer for free at the end of the device’s lifetime. Details are regulated in the respective national legislations.